Diesel Tank Equipment

The Locking Angle Brass Gate Valve is used primarily on the bottom outlet of a gravity fed diesel storage tank. These gate valves are designed to come out at 90º to take away the pressure on the hose, and to maximize the flow rate through the delivery hose without restriction.

The locking lever on these gate valves allows it to be padlocked when not in use. This angle gate valve is supplied as standard on some of our Gravity Hose Kits.

The Brass Gate Valve is a standard gate valve which can be used for a variety of applications, including on some of our Gravity Hose Kits. These gate valves are designed for starting/shutting off flow. The gate valves are used within fuel and water installations, and are suitable for use with diesel, oil and water.

Brass Body & Bonnet, Cast Handwheel, Screwed BSPT. PN20 rating, Temperature -20°C to 120°C.

The Brass Angle Ball Valve is a nickel plated 90° full bore brass ball valve that meets EN331  standards. These angle ball valves are rated PN40 and are suitable in temperatures between -20°c - + 110°c.

The Red Handle Lever Ball Valve is a nickel-plated full bore brass ball valve popular in fuel, plumbing, heating & waterworks applications. Designed for starting/shutting off flow, these lever ball valves have a PVC coated steel handle, PTFE seats and an anti-blowout stem.

Rated PN32 ¼” to 1”, PN25 1¼” to 2”, PN30 2½” & 4”, Temperature 0°C to 90°C.

The Yellow Handle Lever Ball Valve is a nickel-plated full bore brass valve popular within gas, water and fuel applications and comes in a range of sizes. These lever ball valves are WRAS and EN331:1998 gas approved, have a steel handle, NBR o-ring and PTFE seals, and come in two different pressure ratings depending upon the size of the valve.

The Piusi Vantage Quick Locking Foot Valve and Strainer has been specifically designed for the safe and easy transfer of diesel from drums and tanks into plant machinery. This non return valve has an environmentally friendly, quick locking feature that locks the valve seat into position to stop the leakage of diesel during heavy handed operation.

The CIM 32DK Check Valve is a spring loaded, brass non return valve that can be used for heating, sanitary, compressed air systems, pumps and fuel distribution networks. These check valves are suitable for installation in vertical, horizontal or oblique pipelines to allow flow in one direction. The CIM 32DK range of non return valves have M x F BSP internal threads on both the inlet and outlet, and have Viton seals.

The CIM 30DK Check Valve is a spring loaded, non return valve designed for use with heating, sanitary, compressed air systems, pumps and fuel distribution networks. These check valves can be fitted in vertical, horizontal or oblique pipelines to allow the flow to go in one direction. These non return valves with Viton seals have F x F BSP internal threads on both the inlet and outlet. 

The Metal PRV Tank Vent Valve has an integrated poppet type valve designed to prevent fuel vapours from escaping under normal operating conditions. This Teflon coated aluminium pressure vacuum vent valve is fitted on top of risers on stage 1B vapour recovery systems and static tanks.

The Pressure Regulating Anti-Syphon Valve from Lafon ensures the smooth running of a pumping system connected to an above ground storage tank. This pressure regulating valve is designed to avoid accidently emptying the tank by overloading the pump and delivery system, thereby limiting product loss and site pollution.

Constructed from aluminium and copper-aluminium alloy with special hydrocarbon seals, the pressure regulating valve prevents head loss and regulates and stabilises the flow with no hammering effect. Thanks to their tri-flange connection, these pressure regulating valves can be removed and serviced without disturbing the installation’s pipe work.

The GOK Pressure Regulating Valve is designed for use on single appliance gravity feed systems, primarily oil heating, with a liquid head range between 2metres and 30metres. These pressure regulating valves have a fixed outlet pressure of 100 mbar for flow rates up to 20litres per hour.

The GOK De-Aerator is a combination of an oil filter, de-aerator and shut off valve, suitable for kerosene, oil and biofuels with up to 20% fatty acid methyl ester.

This de-aerator removes gas/air bubbles from a single line fuel system, helping to eliminate any pump and nozzle problems associated with gas/air in the fluid. This GOK system eliminates multiple external connections, which reduces the risk of leakage, and is suitable for mounting indoors.