Our Steel Bunded Diesel Dispensing Tanks are perfect for commercial fuel installations. This 27,000 litre capacity Steel Bunded Diesel tank is manufactured by us, in the North of England.

The TEB27250R comes as standard with a secure, lockable roller shutter door & are manufactured from high quality mild steel plate to BS EN 10025.

The outer tank holds a minimum of 110% of the inner tank to comply with all current legislation & comes with a 10 year guarantee, though if properly maintained, the TEB Diesel Tanks are built to last over 30 years.

This 27,000 litre Diesel Tank can be be fully bespoke built, whether it's a different inlet / outlet, higher flow pump, hose reels or even a split compartment to allow storage of other fluids like DEF within the same tank. We can also adjust the Length, Width or Height to suit your requirement. Please contact us to discuss options & get a quote.

Standard Spec -

Bund Gauge

Hydrostatic Contents Gauge

3" BSP Fill Point with Cap & Non return valve

3" Tank Vent & Cap

Service Hatch

Base Plinths

High Security Sumped Cabinet with Lockable Aluminium Roller Shutter Door

Lifting Points

BS381C 226 - Green (Any colour available on request. Marine grade paints available)

10 Year Guarantee (life expectancy over 30 years if properly maintained)

Contact us if you would like a quote for this tank & let us know if you'd require any changes / additional items

Compliancy -

BS799 part 5

Control of pollution (oil storage) (England) regulations 2001

PPG2

PPG26

This Horizontal, cylindrical bulk diesel tank with a double skin design is constructed from mild steel plate to BS EN 10025.

The inner tank provides the required storage area, whilst the outer tank forms the required bund with capacity of 110% of the total liquid being stored. The tank vent is piped into the bund and then to the atmosphere further reducing the risk of spills in the event of overfilling the tank.

These tanks are fitted with steel base supports to eliminate ground contact with the tank base.

This Cylindrical fuel tank can be supplied with either a lockable fill point cabinet or full size inset cabinet to house any ancillary equipment fitted with lockable steel or roller shutter door.

Specification:

1 x 2” tank to bund vent.   1 x 2” atmospheric vent with cap.   1 x Bund contents test and drain point with dial gauge. 1 x 2” Base feed with isolation valve.   1 x 2” Top feed with foot valve and strainer.   1 x 2” socket for tank contents. 1 x 2” Socket fill point.   4 x lift points (lift empty only).   1 x 1” socket in bund for optional bund alarm probe.

1 x 2” socket in top of tank for optional high / low alarm probes.     1 x 600mm Service hatch.     Base support: Tank support cradles with ground anchor points.

Paint finish: ISO 12944 C3 Compliant coating. Application design life: 7 years. Typical environments include: Urban and industrial atmospheres, Moderate sulphur dioxide levels, production areas with humidity.

Compliancy:

BS799 Part 5. PPG2, DSEAR 2002

Control of Pollution (Oil Storage) (England) Regulations,

Environment (Oil Storage) (Scotland) Regulations,

Control of Pollution (Oil Storage) Regulations (Northern Ireland),

Control of Pollution (Oil Storage) (Wales) Regulations.

Our Steel Bunded Diesel Dispensing Tanks are perfect for commercial fuel installations. This 32,000 litre capacity Steel Bunded Diesel tank is manufactured by us, in the North of England.

The TEB32650R comes as standard with a secure, lockable roller shutter door & are manufactured from high quality mild steel plate to BS EN 10025.

The outer tank holds a minimum of 110% of the inner tank to comply with all current legislation & comes with a 10 year guarantee, though if properly maintained, the TEB Diesel Tanks are built to last over 30 years.

This 32,000 litre Diesel Tank can be be fully bespoke built, whether it's a different inlet / outlet, higher flow pump, hose reels or even a split compartment to allow storage of other fluids like DEF within the same tank. We can also adjust the Length, Width or Height to suit your requirement. Please contact us to discuss options & get a quote.

Standard Spec -

Bund Gauge

Hydrostatic Contents Gauge

3" BSP Fill Point with Cap & Non return valve

3" Tank Vent & Cap

Service Hatch

Base Plinths

High Security Sumped Cabinet with Lockable Aluminium Roller Shutter Door

Lifting Points

BS381C 226 - Green (Any colour available on request. Marine grade paints available)

10 Year Guarantee (life expectancy over 30 years if properly maintained)

Contact us if you would like a quote for this tank & let us know if you'd require any changes / additional items

Compliancy -

BS799 part 5

Control of pollution (oil storage) (England) regulations 2001

PPG2

PPG26

Our Steel Bunded Diesel Dispensing Tanks are perfect for use anywhere fuel is required. This 32,000 litre capacity Steel Bunded Diesel tank is manufactured by us, in the North of England.

The TEBT32650 Bunded Diesel Tank comes as standard with a secure, sumped lockable cabinet which is fitted with a steel door. All of our tanks are manufactured from high quality mild steel plate to BS EN 10025. This Diesel Dispensing Tank can be equipped with almost any equipment required, so is suitable for almost all installations.

The outer tank holds a minimum of 110% of the inner tank to comply with all current legislation & comes with a 10 year guarantee, though if properly maintained, all of our Fuel Tanks are built to last over 30 years.

This 32,000 litre Steel Diesel Tank can be be fully bespoke built, whether it's a different inlet / outlet, higher flow pump, hose reels or even a split compartment to allow storage of other fluids like DEF within the same tank. We can also adjust the Length, Width or Height to suit your requirement. Please contact us to discuss options & get a quote.

Standard Spec -

Bund & Contents Gauge

3" BSP Fill Point with Cap & Non return valve

Overfill prevention valve

Tank Vent Cap

Service Hatch

Corner Plinths with optional tank legs

High Security Sumped Cabinet with Lockable aluminium roller shutter door

Lifting Points (Lift empty only)

BS381C 226 - Green (Any colour available on request. Marine grade paints available)

10 Year Guarantee (life expectancy over 30 years if properly maintained)

Contact us if you would like a quote for this tank & let us know if you'd require any changes / additional items

Compliancy -

BS799 part 5

Control of pollution (oil storage) (England) regulations 2001

PPG2

PPG26

This 30,000 Litre Steel Bunded Diesel Dispensing Tank by Tuffa Tanks is manufactured in the UK from hard-wearing 6mm Mild steel, and backed by a 10 year guarantee. The life expectancy for this tank is over 30 years when properly installed & maintained.

Tuffa's 30000SBFS comes complete with - 

230v External Pump

6 Metre Delivery Hose

Automatic Shut off Nozzle

K33 Flow Meter

Nozzle Holster

3" BSP Fill Point with Cap & Chain

Overfill Prevention gauge

Tank Vent

C2020 Contents Gauge & Bund Alarm (230v)

10 Micron Water/Particle Filter

High security cabinet with roller shutter door

Channel Runners

Lifting eyes

Grey RAL 7001 Paint finish

10 Year Guarantee

The options for this tank include - 

K44 pulsed outlet flowmeter – allows connection to a separate fuel management system (10:1 pulses per litre).

Hose reel – a self-retracting hose reel with 8m delivery hose.

Pump options – Higher flow rate pumps available.

Fuel management system – a Piusi fuel management system fitted within the lockable cabinet that allows authorised users to dispense the fuel from the tank via a pin code or a magnetic key system. The software provided means the system can also be connected to a PC for viewing the transaction data enabling better tracking and real-time information. Cloud systems available.

No dispensing equipment – suitable for diesel generators or sites with existing dispensing equipment.

This 47,000 Litre Steel Bunded Diesel Dispensing Tank by Tuffa Tanks is manufactured in the UK from hard-wearing 6mm Mild steel, and backed by a 10 year guarantee. The life expectancy for this tank is over 30 years when properly installed & maintained.

Tuffa's 47000SBFS comes complete with - 

230v External Pump

6 Metre Delivery Hose

Automatic Shut off Nozzle

K33 Flow Meter

Nozzle Holster

3" BSP Fill Point with Cap & Chain

Overfill Prevention gauge

Tank Vent

C2020 Contents Gauge & Bund Alarm (230v)

10 Micron Water/Particle Filter

High security cabinet with roller shutter door

Channel Runners

Lifting eyes

Grey RAL 7001 Paint finish

10 Year Guarantee

The options for this tank include - 

K44 pulsed outlet flowmeter – allows connection to a separate fuel management system (10:1 pulses per litre).

Hose reel – a self-retracting hose reel with 8m delivery hose.

Pump options – Higher flow rate pumps available.

Fuel management system – a Piusi fuel management system fitted within the lockable cabinet that allows authorised users to dispense the fuel from the tank via a pin code or a magnetic key system. The software provided means the system can also be connected to a PC for viewing the transaction data enabling better tracking and real-time information. Cloud systems available.

No dispensing equipment – suitable for diesel generators or sites with existing dispensing equipment.

This Horizontal, cylindrical bulk diesel tank with a double skin design is constructed from mild steel plate to BS EN 10025.

The inner tank provides the required storage area, whilst the outer tank forms the required bund with capacity of 110% of the total liquid being stored. The tank vent is piped into the bund and then to the atmosphere further reducing the risk of spills in the event of overfilling the tank.

These tanks are fitted with steel base supports to eliminate ground contact with the tank base.

This Cylindrical fuel tank can be supplied with either a lockable fill point cabinet or full size inset cabinet to house any ancillary equipment fitted with lockable steel or roller shutter door.

Specification:

1 x 2” tank to bund vent.   1 x 2” atmospheric vent with cap.   1 x Bund contents test and drain point with dial gauge. 1 x 2” Base feed with isolation valve.   1 x 2” Top feed with foot valve and strainer.   1 x 2” socket for tank contents. 1 x 2” Socket fill point.   4 x lift points (lift empty only).   1 x 1” socket in bund for optional bund alarm probe.

1 x 2” socket in top of tank for optional high / low alarm probes.     1 x 600mm Service hatch.     Base support: Tank support cradles with ground anchor points.

Paint finish: ISO 12944 C3 Compliant coating. Application design life: 7 years. Typical environments include: Urban and industrial atmospheres, Moderate sulphur dioxide levels, production areas with humidity.

Compliancy:

BS799 Part 5. PPG2, DSEAR 2002

Control of Pollution (Oil Storage) (England) Regulations,

Environment (Oil Storage) (Scotland) Regulations,

Control of Pollution (Oil Storage) Regulations (Northern Ireland),

Control of Pollution (Oil Storage) (Wales) Regulations.

Our Steel Bunded Diesel Dispensing Tanks are perfect for commercial fuel installations. This 36,000 litre capacity Steel Bunded Diesel tank is manufactured by us, in the North of England.

The TEB36300R comes as standard with a secure, lockable roller shutter door & are manufactured from high quality mild steel plate to BS EN 10025.

The outer tank holds a minimum of 110% of the inner tank to comply with all current legislation & comes with a 10 year guarantee, though if properly maintained, the TEB Diesel Tanks are built to last over 30 years.

This 36,000 litre Diesel Tank can be be fully bespoke built, whether it's a different inlet / outlet, higher flow pump, hose reels or even a split compartment to allow storage of other fluids like DEF within the same tank. We can also adjust the Length, Width or Height to suit your requirement. Please contact us to discuss options & get a quote.

Standard Spec -

Bund Gauge

Hydrostatic Contents Gauge

3" BSP Fill Point with Cap & Non return valve

3" Tank Vent & Cap

Service Hatch

Base Plinths

High Security Sumped Cabinet with Lockable Aluminium Roller Shutter Door

Lifting Points

BS381C 226 - Green (Any colour available on request. Marine grade paints available)

10 Year Guarantee (life expectancy over 30 years if properly maintained)

Contact us if you would like a quote for this tank & let us know if you'd require any changes / additional items

Compliancy -

BS799 part 5

Control of pollution (oil storage) (England) regulations 2001

PPG2

PPG26

Our Steel Bunded Diesel Dispensing Tanks are perfect for use anywhere fuel is required. This 36,000 litre capacity Steel Bunded Diesel tank is manufactured by us, in the North of England.

The TEBT36300 Bunded Diesel Tank comes as standard with a secure, sumped lockable cabinet which is fitted with a steel door. All of our tanks are manufactured from high quality mild steel plate to BS EN 10025. This Diesel Dispensing Tank can be equipped with almost any equipment required, so is suitable for almost all installations.

The outer tank holds a minimum of 110% of the inner tank to comply with all current legislation & comes with a 10 year guarantee, though if properly maintained, all of our Fuel Tanks are built to last over 30 years.

This 36,000 litre Steel Diesel Tank can be be fully bespoke built, whether it's a different inlet / outlet, higher flow pump, hose reels or even a split compartment to allow storage of other fluids like DEF within the same tank. We can also adjust the Length, Width or Height to suit your requirement. Please contact us to discuss options & get a quote.

Standard Spec -

Bund & Contents Gauge

3" BSP Fill Point with Cap & Non return valve

Overfill prevention valve

Tank Vent Cap

Service Hatch

Corner Plinths with optional tank legs

High Security Sumped Cabinet with Lockable aluminium roller shutter door

Lifting Points (Lift empty only)

BS381C 226 - Green (Any colour available on request. Marine grade paints available)

10 Year Guarantee (life expectancy over 30 years if properly maintained)

Contact us if you would like a quote for this tank & let us know if you'd require any changes / additional items

Compliancy -

BS799 part 5

Control of pollution (oil storage) (England) regulations 2001

PPG2

PPG26

This Steel Bunded Diesel Dispensing Tank is designed to provide high levels of fuel security for large quantities of fuel. The diesel tank itself is fitted inside a 20ft ISO bunded container, which is further secured by the additional high security lockable roller shutter door fitted behind the standard container hinged doors. Because this tank is housed within a container, from the outside it looks like any container would with almost no indication that large quantities of fuel is stored inside.

This 20,000 litre steel bunded diesel dispensing tank is capable of being lifted and transported around site when full and comes fitted with 230v fuel transfer equipment including a Panther 56 diesel pump, mechanical flow meter, 10 metre hose reel, automatic shut off nozzle and a 10 micron water & particle filter. If you require different dispensing equipment like a fuel management system, please contact us for a quote.

The NTS CON20 diesel tank is manufactured in compliance with BS799 from high quality mild steel plate to BS EN 10025.

Specification

20,000 Litre capacity

230v Diesel transfer pump

10 Metre delivery hose with spring-retractable hose reel

3 digit mechanical flow meter

Automatic shut off nozzle

Overfill valve

Unitel hydrostatic contents gauge

Bund gauge

Lockable hinged steel doors

Lockable aluminium roller shutter door

Outlets - 1 x 1.5" BSP feed point, 2 x 1" BSP feed Point, 1 x 1/2" BSP feed Point, 1 x 1/2" BSP Return point

To change any of the standard specification, please contact us for a quote

Mild steel rigid bunded container with steel portable bund fully welded with mechanical handling base and top lifting facility.  Both the inner and outer tanks are constructed from mild steel plate to BS EN 10025.

The unit is manufactured with an integrally bunded tank with capacity to hold an additional 10% of the total liquid being stored which is then fitted within a steel outer bund providing a secondary bund to the main storage tank. A bulk head is fitted in front of the storage tank to provide an area in which all the tanks control and dispensing equipment is housed.  A steel roller shutter door is provided for increased security

These units are built to the same stringent standards as the UN approved Fuel Bank range, and capable of being lifted and transported around site when full.

Compliancy:

BS799 part 5,

Control of pollution (oil storage) (England) regulations 2001

PPG2

PPG26

Our Steel Bunded Diesel Dispensing Tanks are perfect for use anywhere fuel is required. This 40,000 litre capacity Steel Bunded Diesel tank is manufactured by us, in the North of England.

The TEBT40900 Bunded Diesel Tank comes as standard with a secure, sumped lockable cabinet which is fitted with a steel door. All of our tanks are manufactured from high quality mild steel plate to BS EN 10025. This Diesel Dispensing Tank can be equipped with almost any equipment required, so is suitable for almost all installations.

The outer tank holds a minimum of 110% of the inner tank to comply with all current legislation & comes with a 10 year guarantee, though if properly maintained, all of our Fuel Tanks are built to last over 30 years.

This 40,000 litre Steel Diesel Tank can be be fully bespoke built, whether it's a different inlet / outlet, higher flow pump, hose reels or even a split compartment to allow storage of other fluids like DEF within the same tank. We can also adjust the Length, Width or Height to suit your requirement. Please contact us to discuss options & get a quote.

Standard Spec -

Bund & Contents Gauge

3" BSP Fill Point with Cap & Non return valve

Overfill prevention valve

Tank Vent Cap

Service Hatch

Corner Plinths with optional tank legs

High Security Sumped Cabinet with Lockable aluminium roller shutter door

Lifting Points (Lift empty only)

BS381C 226 - Green (Any colour available on request. Marine grade paints available)

10 Year Guarantee (life expectancy over 30 years if properly maintained)

Contact us if you would like a quote for this tank & let us know if you'd require any changes / additional items

Compliancy -

BS799 part 5

Control of pollution (oil storage) (England) regulations 2001

PPG2

PPG26