Diesel Flow Meters & Gauges

The K24 Turbine Fuel Pulse Meter is a digital turbine pulse meter, designed for measuring the transfer of diesel and flammable liquids such as petrol.

This K24 digitial pulse meter has an aluminium body making it very sturdy and durable, and is also bi-directional allowing the flow to be counted either way. These fuel flow meters with pulse output have no electronic display as they are used to interface consumption information with external management systems, or indicators allowing the information to be read and stored elsewhere. The K24 turbine pulse meter can be used in flammable environments, and is also for use with a non commercial fuel delivery pump either part of, or externally inline.

The Piusi K400 digital fuel flow meter is designed to measure the quantity of diesel, oil or windscreen fluid that has been used. This accurate oval gear fuel counter meter is popular for the dispensing of oil in garage and workshop environments, as well as the low flow diesel transfer applications.  Due to the operating principle of the oval gears Piusi K400 provides high degree of accuracy when measuring and reduced loss of pressure.

There are two separate versions available of the Piusi K400 fuel flow meter; one for use with diesel and oil, and another for windscreen fluid.

The SAMOA Mechanical Nutating Disk Flow Meter is suitable for high-accuracy monitoring of diesel & Comes fitted with a 3 digit resettable totaliser (99.9L Max) & a 6 Digit non resettable totaliser. This Mechanical Flow Meter from SAMOA is suitable for gravity fed applications with a minimum flow of 20 litres per minute & has a very low pressure drop.

The meter allows to orientate the inlet and outlet in four different positions.

Maximum working pressure: 10 bar

Flow range: 20 to 100 litre/min

Precision after calibration: +/- 1%

The Unitel Hydrostatic Fuel Tank Gauge from Afriso Euroindex is a pneumatic tank level indicator designed for showing the amount of fuel oil, diesel or AdBlue™ remaining in a storage tank. It has a spring loaded plunging mechanism that when released causes the needle to settle on the contents left within the storage tank. As a calibrated gauge, this is then displayed clearly in litres on its large mechanical face. This fuel tank level gauge is compatible with horizontal, vertical, cylindrical and rectangular tanks, with heights between 900mm and 3000mm for diesel and up to 2500mm for water/AdBlue, making the Unitel a highly popular and versatile tank level indicator.

The Unitel fuel tank gauge also benefits from an adjustable second needle for setting a level parameter, which you can then use to identify the tank has hit the level at which you have decided you need to reorder fuel. Supplied in an impact resistant casing, the Euroindex contents gauge can be easily wall or tank mounted.

Please note, that upon order of this gauge you will be emailed a questionnaire, you will need to fill this in and send it to sales@northerntankstore.co.uk. As calibrated fuel tank gauges are made to order, there may be a lead time of 5-10 working days.

The Piusi K24 Fuel Flow Meter is a digital turbine meter designed for the accurate counting of the quantity of diesel or water dispensed. Designed for flexible installation, this fuel counter meter can be added inline or by the nozzle end for easy reading of the compact yet clear digital display. This diesel fuel flow meter also has a face that can be rotated four way for ease of installation. Watch this video to see how to change the flow direction to meet your requirements. 

This diesel flow meter is of lightweight plastic construction, which makes it perfect for portable diesel transfer applications such as in the agricultural and plant markets where the dispensing system needs to be carried around. Thanks to its low minimum flow rate, the K24 flow meter is suitable for gravity as well as pump installations.

The SAMOA Digital line meter is a robust, digital flow meter provided with metering chamber with turbine system, electronic display, reset button, partial metering function (99.999 litre), resettable totaliser (999,999) & calibration function.

Maximum working pressure: 10 bar

Bursting Pressure: 40 bar

Flow range: 5 to 120 litre/min

Precision after calibration: +/- 1%

Working temperature range: -10 - +50 °C

Pressure Drop: 0.30 bar @ 100lpm

Fluid Viscocity range: 2-5.35 cSt

IP65 Protection

The Piusi K24 Aluminium Fuel Flow Meter is a digital turbine meter designed for accurately measuring the quantity of diesel dispensed. The K24 fuel counter meter benefits from a compact yet clear digital display, which can be rotated in four ways as well as being able to be installed inline or by the delivery nozzle for the user’s easiest reading. Watch this video for how to rotate the display of the Piusi K24. 

Made by Italian manufacturer Piusi, this diesel flow meter has a robustly constructed aluminium body built take more stress than the plastic Piusi K24 alternative, and is bi-directional allowing the flow to be counted either way. The K24 diesel fuel flow meter is a cost-effective option, particularly popular for use within portable diesel dispensing applications thanks to its compact and lightweight nature. Thanks to its low minimum flow rate, the Piusi K24 flow meter is suitable for gravity as well as pump installations.

The K44 is a mechanical flow meters suitable for the monitoring of diesel, It has a partial indicator with 4 digits (max. 9999 Litres), with a total of 7 digits.

PRECISION AND QUALITY

The K44 mechanical diesel flow meter have been designed for precise measurement of the quantity of fuels dispensed for non-commercial use. Easy to calibrate and install, the K44 flow meter can monitor the quantity dispensed for a maximum flow rate of 20-120 l/min and with a maximum working pressure of the pump of 10 bar. In addition, it can guarantee a burst pressure of 30 bar with a metering accuracy of +/- 1%.

RELIABILITY

The K44 mechanical flow meter for diesel is easy to calibrate at the place of installation and is suitable for installation on pumps or service stations for diesel, for those who want to keep the amount of dispensed fluid monitored without special needs for storage.

It is reliable and an economic mechanical flow meter that can also be used by gravity, thanks to the low resistance to flow.

The Piusi Remote Pulse Display is designed for the remote control of pulse meters. This Piusi system has a large screen allows the user to clearly see the quantity of fluid delivered per time and the non resettable totaliser. It also comes with software applications for the calibration of pulse meters.

The remote display is the ideal addition wherever the display and reading of quantities delivered are indispensable, not directly at the point of installation of the pulse meters, but over a distance. They can be supplied in a basic display only form, or with a pulse emitter to connect to other types of systems that recognize discreet quantities of impulses.

F1175200A - For use with K600/3

F1175300A - For use with K600/4

F1175400A - For use with K700

F00495010 - Universal Pulse Out - for use with K200, K400, K600/3, K600/4 & K700

F00495020 - Universal Pulse In - For use with all Piusi Pulse out Meters

F0049503B - For use with Piusi Turbinox or K24

R1152600A - For use with K900

The K33 BIO is the Biodiesel version of the market leading Piusi K33. This meter features the same construction and mechanical properties as the K33, but is stronger as it has to resist the different blends of biodiesel up to B100. With an accuracy of +/-1% and repeatability of 0.3%, the Piusi K33 BIO is an ideal solution for installation with pumps or dispensers for those who need to monitor the quantity of diesel dispensed.

The SAMOA Mechanical Nutating Disk Flow Meter is suitable for high-accuracy monitoring of diesel & Comes fitted with a 4 digit resettable totaliser (999.9L Max) & a 6 Digit non resettable totaliser. This Mechanical Flow Meter from SAMOA is suitable for gravity fed applications with a minimum flow of 20 litres per minute & has a very low pressure drop.

The meter allows to orientate the inlet and outlet in four different positions.

Maximum working pressure: 10 bar

Flow range: 20 to 100 litre/min

Precision after calibration: +/- 1%

The K33 ATEX is a mechanical flow meter suitable for the monitoring of diesel, gasoline and kerosene. For non-commercial use, the K33 ATEX meets the ATEX requirements for precise measurement of the quantity of Gasoline, kerosene and diesel dispensed in environments with a high risk of explosion.

The ATEX mechanical flow meter has a 3-digit partial indicator, and a 6 digit totaliser.

PRECISION AND QUALITY

The K33 ATEX mechanical flow meter for gasoline, kerosene and diesel has been designed to ensure precise measurement of the amount of fuel dispensed. Easy to calibrate and install, the K33 ATEX flow meter can monitor the quantity of fuel dispensed for a maximum flow rate of 20-120 l/min and with a maximum working pressure of the pump of 3.5 bar. In addition, it can guarantee a burst pressure of 28 bar with a metering accuracy of +/- 1%.

RELIABILITY

The K33 ATEX mechanical flow meter for gasoline, kerosene and diesel is suitable for application to pumps or gasoline dispensers and is suitable for those who are looking for a simple and economic product, without particular need for control over the fleet of vehicles. The K33 ATEX can be installed in any position on both rigid and flexible pipes, as well as directly on pumps or tanks. It can also be used by gravity, thanks to its low resistance to flow.

The K33 ATEX as an ATEX flow meter is included in group II, category 2 G IIB T=85°C (T6), and therefore it is suitable for working in areas classified as "1" and "2" according to directive 99/92/EC.