Cim-Tek 70066 Hydrosorb Fuel Filter Element

The CTS Ultra Compact Oil Tank Filter Kit is designed for bottom outlet domestic heating oil tanks to remove debris with instant isolation and no pollution risk. The kit is comprised of the Ultra Compact isolation valve, 40µ cleanable alloy bowl filter and all of the fittings required for installation. 

On other oil tank filter assemblies, an isolation valve is not the first component screwed into the tank which means that if the filter valve needs replacing then the tank needs to be drained. By having the Ultra Compact valve installed first, this filter assembly kit saves the engineer the couple of hours it would previously have taken to pump the tank out, replace the filter valve and then pump the heating oil back in. 

The Ultra Compact oil tank isolator valve is also available alone to replace the 1" BSPT x 1/2" BSPP adaptor supplied with generic filter assemblies e.g. the ARMKIT. Both the filter kit and the valve alone can be retrofitted during service or at the time of the original tank installation. 

The Piusi K200 digital fuel flow meter is designed to measure the dispensing of diesel, lubrication oil, grease and anti-freeze at a maximum flow rate of 2.8lpm. This oval gear fuel flow meter combines high levels of accuracy with low pressure losses, and is compact in design and easy to install. The Piusi K200 electronic grease, diesel and oil flow meter is ideal for industrial applications where fluid delivery control is required. It can be installed in stationary systems on fluid transfer and distribution lines, and in mobile applications as an accessory for delivery valves and guns.

The SAMOA Polaris Series transfer Pump is a self priming diesel pump with self-adjustable vanes, Pump body made of cast-iron with rustproof treatment, rotor of sintered steel and vanes of acetal resin. The pumps include a by-pass valve & can be mounted vertically or horizontally and has 1.8m cable with plug.

Inlet/outlet connection: 1" BSP (F) or flange coupling

Maximum suction lift: 2.5m

Pressure: 1.7 bar

230v - 50hz - 4.6 amp - 750 watt

Electric AC motor with IP55 protection, allow continuous operation duty.

On/off switch and fuse.

SAMOA Reelmaster RM-12CL individually enclosed hose reel for synthetic and mineral oils.

• Corrosion resistant aluminium enclosure form a very rigid and stable structure, with light weight and attractive design.
• Fatigue resistant steel spring for years of durable performance and even load when pulling and recoiling the hose.
• Full port shaft and swivel for no restrictions.
• Spool mounted on two permanent lubricated and sealed ball bearings to reduce torque load on spring for smooth retraction and longer life.
• Large effective radial latching area for easier operation.
• Positionable mounting brackets to accommodate any method of mounting.
• Two large lateral service windows facilitate common maintenance operations.
• Hose reels with hose include 0.8 m inlet hose.

Hose length: 10, 15 or 18 metres

Hose Internal Diameter: 1/2"

Connecting Hose Inlet: 1/2" BSP (M)

Delivery Hose Outlet: 1/2" BSP (M)

Pressure Rating: 160 bar

Weight: 19-22kg (with hose)