Cim-Tek 70063 Hydrosorb Water/Particle Filter

This Cim-Tek Filter Element is a replacement, 30 micron element for the Cim-Tek Hydrosorb fuel storage tank filter. This fuel tank filter element can be easily replaced to remove water and debris out of fuel continually.

This element is suitable suitable for the 70067 Cim-Tek Filter.

The Hytek High Flow Diesel Transfer Pump is a low cost, high quality Fuel pump. The pump is suitable for Diesel or Biodiesel up to B100. 

Hytek 230v Diesel Pump Specification -

Self Priming, Direct Drive Vane Pump

230v 50hz

On / Off Switch

IP55 Weather Protection

2 Metre Power Cable

1" Inlet / Outlet

Duty Cycle: 30 minutes

80 L/min or 100 L/min maximum flow rate

Integral Bypass valve & Filter

Suitable for Diesel or B100

2 Year Warranty

The SAMOA Pumpmaster 2 3:1 is a double acting air operated medium pressure pump for transferring lubricants. These pumps are suitable for lubricants, transmission fluid, hydraulic oils and gear oil.

This oil transfer pump kit for drums comes complete with a 3m delivery hose, and a choice of delivery nozzles.

The GoldenRod 496-5 Fuel Filter Element is the replacement, 17 micron paper cartridge for the GoldenRod 496 water block fuel filter. You should change your GoldenRod filter element when you notice the flow rate of your system dropping, as this indicates the fuel tank filter is getting full.

We would recommend using the GoldenRod filter wrench when changing the paper element to limit the risk of cracking of the bowl whilst trying to screw it off with force, and ensure it is screwed back on tight enough to prevent leaks.