Cim-Tek 70024 Hydroglass Water/Particle Filter

The Fuel Tank Vent Cap is to be used on an above ground fuel storage tank’s 2” male thread to provide ventilation. These vent caps, which are designed to be fitted on to heating oil storage tanks, have a plastic mesh that prevents particles and debris from getting into the tank from this point. As these have no thread, either side of the oil tank vent cap has a screw that cuts into the male thread on the tank enabling it to be held into place.

The Oil Check Valve is a brass non return valve, specially designed for use in heating oil systems. These spring loaded check valves come complete with 8mm and 10mm pipe connectors.

The GoldenRod 470-5 Fuel Filter Element is the replacement, 10 micron paper cartridge for the GoldenRod 495 fuel tank filter. Supplied in a box of 12. You should change your GoldenRod filter element when you notice the flow rate of your system dropping, as this indicates the fuel storage tank filter is getting full.

We would recommend using the GoldenRod filter wrench when changing the paper element to limit the risk of cracking of the bowl whilst trying to screw it with force, and ensure it is screwed back on tight enough to prevent leaks.

This Brass Check Valve is a spring loaded valve for use in pipe systems where flow is required in one direction and no return flow is allowed. These check valves can be installed in any orientation and are fitted with Female BSP threads.