Cim-Tek 70024 Hydroglass Bio Fuel Filter Element

This AdBlue™ Delivery Hose is a high quality solution designed for the dispensing of AdBlue™, otherwise referred to as DEF (diesel exhaust fluid). It is primarily used on manual AdBlue™ pump installations.

The Brass Compression Lever Ball Valves are designed for starting/shutting off flow and come in a range of sizes. These nickel-plated full bore brass ball valves have a steel handle, NBR o-ring and PTFE seals and come with heavy duty industrial brass olives. These lever ball valves are WRAS and EN331:1998 gas approved and are a popular choice within heating and plumbing applications.

The Cim-Tek 70062 Filter Element is a replacement, 10 micron cannister filter element for use with Diesel and Petrol fuel. The 70062 Hydrosorb Spin-on Filters, designed for fuel pumps and dispensers, are versatile and economical for agricultural and low-volume commercial applications.

The 260 series Cim-Tek filters should not be used with Aviation fuels.

This element is suitable suitable for the 70062 Cim-Tek Filter.

The Adam Pumps PA1 70 Diesel Transfer Pump is a low cost, high quality Fuel pump manufactured in Italy. Due to the design of this pump, it can replace similar types of pumps as the location of the Inlet/Outlet ports & Footprint of the pump are the same as many others. With a low noise output & a 66 Litre per minute maximum flow rate, the PA1 70 from Adam Pumps is an economical choice for diesel transfer.

Adam Pumps 230v PA1 70 Specification -

230v 50hz Pump

On / Off Switch

IP55 Weather Protection

2 Metre Power Cable

1" BSPP Female Inlet / Outlet

Duty Cycle: Continuous Duty

70 L/min maximum flow rate

Max pressure: 2 bar

Integral Bypass valve

-20/+50 °C maximum operating temperature

Suitable for Diesel Only

1 Year Warranty