440 Litre CEMO DT Mobile Easy Combi ADR Diesel Dispenser

Totally enclosed generator stores have been specifically designed and are capable of housing all makes of generators up to 100KVA. They offer exceptional protection against the elements and theft and offer full protection in the unlikely event of a fuel spillage eliminating the need for additional oil interceptor trays. Large access doors are fitted for easy access for maintenance.

Features - 

Front access doors: fitted with two, 5 lever dead locks (keyed alike) & two heavy duty spring bolts.

Louvered air intake: One located each side front side with filter mesh and noise deflector plates.

Louvered air outlet: One located in rear panel with filter mesh.

Exhaust outlet: Three interchangeable, high level above air outlet. One located in air outlet panel with removable cover plate.

Extractor fan: Located in the rear of the unit at a high level, fitted with thermostat.

Lifting points: Four Top lift & four low level strapping and lifting points.

Fork lift points:  W250 x H135.

Twist locks plates: Twist locks fitted in base of store for easy transportation.

Earthing boss: 10mm located either side near air intake panel.

Cable outlet: Located either side near air intake panel removable plate for access L240 x H150.

This Horizontal, cylindrical bulk diesel tank with a double skin design is constructed from mild steel plate to BS EN 10025.

The inner tank provides the required storage area, whilst the outer tank forms the required bund with capacity of 110% of the total liquid being stored. The tank vent is piped into the bund and then to the atmosphere further reducing the risk of spills in the event of overfilling the tank.

These tanks are fitted with steel base supports to eliminate ground contact with the tank base.

This Cylindrical fuel tank can be supplied with either a lockable fill point cabinet or full size inset cabinet to house any ancillary equipment fitted with lockable steel or roller shutter door.

Specification:

1 x 2” tank to bund vent.   1 x 2” atmospheric vent with cap.   1 x Bund contents test and drain point with dial gauge. 1 x 2” Base feed with isolation valve.   1 x 2” Top feed with foot valve and strainer.   1 x 2” socket for tank contents. 1 x 2” Socket fill point.   4 x lift points (lift empty only).   1 x 1” socket in bund for optional bund alarm probe.

1 x 2” socket in top of tank for optional high / low alarm probes.     1 x 600mm Service hatch.     Base support: Tank support cradles with ground anchor points.

Paint finish: ISO 12944 C3 Compliant coating. Application design life: 7 years. Typical environments include: Urban and industrial atmospheres, Moderate sulphur dioxide levels, production areas with humidity.

Compliancy:

BS799 Part 5. PPG2, DSEAR 2002

Control of Pollution (Oil Storage) (England) Regulations,

Environment (Oil Storage) (Scotland) Regulations,

Control of Pollution (Oil Storage) Regulations (Northern Ireland),

Control of Pollution (Oil Storage) (Wales) Regulations.

The 2,500 Litre Premium CEMO Diesel Cube is a plastic diesel dispensing tank suitable for indoor or outdoor use. Fitted with a 230v 56lpm pump kit, K33 Flow meter & Water separator, the 2,500 litre Premium CEMO CUBE-Tank is an ideal solution to most dispensing requirements.

The 10299 CEMO CUBE-Tank Premium come complete with -

230v 56L/min Transfer Pump

8 Metre Automatic Hose Reel

Automatic Shut off nozzle with Holder

K33 Flow Meter

Water / Particle Filter

Tank Vent

Tanker Fill Point Coupling

Tank Contents Gauge (Analogue)

Electronic Overfill Sensor

Visual Bund Alarm

Hinged lid

The CEMO DT-Mobile Easy 440L Generator Tank is the ideal solution to your on-site refuelling needs. Manufactured from High Quality polyethylene, this Transportable Generator Tank is approved for transport under ADR.

The CEMO DT-Mobile Easy 440 Generator Tank Comes complete with the following -

Filler Cap with Vent & Breather Valves

Integral Fork Lift Pockets & Handles

Recesses for ratchet straps during transport

Integral Filler Neck

Hinged Lid