Brass Y-Line Strainer

The Unitel Hydrostatic Fuel Tank Gauge from Afriso Euroindex is a pneumatic tank level indicator designed for use primarily on fuel oil and diesel tanks, but also used as an AdBlue tank gauge. It has a spring loaded plunger that you pull and release until the needle settles on the contents left within the storage tank, which is then displayed clearly as a percentage on its large mechanical face.

This fuel tank level gauge is suitable for horizontal, vertical, cylindrical and rectangular tanks, with heights between 900mm and 3000mm for diesel and up to 2500mm for Water/AdBlue , making the Unitel a highly popular and versatile tank level indicator.

The Unitel fuel tank gauge also benefits from a handy adjustable second needle for setting a level parameter, which you can then use to indicate the level at which you need to reorder fuel. Supplied in an impact resistant casing, the Euroindex contents gauge can be easily wall or tank mounted.

This Cim-Tek Hydroglass Filter Element is a replacement, 10 micron element for the Cim-Tek Hydroglass Bio fuel storage tank filter. This fuel tank filter element can be easily fitted as a spin on cartridge when you need a replacement. The 100lpm element is suitable for the 70024 Cim-Tek filter.

Unlike the Cim-Tek Hydrosorb filters which use a paper element, the Cim-Tek Hydroglass alternatives make use of a high-performance fibre glass element for the more challenging nature of biodiesel. This Cim-Tek fuel filter also benefits from a higher dirt holding capacity which results in longer element life.

The Piusi EXGO! ATEX fuel pump is a 12v fuel transfer pump for flammable liquids. Designed to be OEM integrated into a fuel system in a zone one environment, these ATEX pumps are the ideal solution for small mobile tanks and refuelling small vehicles. This petrol transfer pump has a sturdy, cast iron body, and thanks to its quality manufacturing has a long life span. This 12 volt fuel transfer pump has an integrated bypass valve and thermal protected motor.

Due to regulations this unit is not supplied with battery connectors and is required to be connected into a 12v supply by a qualified electrician.

The SAMOA Digital Preset Oil Nozzle is designed to make dispensing oil more accurate through use of it's automatically closing valve. The meter can be pre-set with up to 10 values to ensure the correct amount of oil is dispensed each time. The meter also has a memory function which shows the last 5 transactions, including the date, time and volume delivered.

This preset oil nozzle is suitable for Motor Oil, Hydraulic Oil, Gear Oil, Automatic Transmission Fluid (ATF) and Anti-Freeze Solutions.

Can be programmed to measure in Gallons, Quarts, Pints or Litres.