Brass Spring Check Valve

The Plastic Tank Vent Cap is designed to fit over a 2” male thread on the top of an above ground fuel storage tank or drum to provide ventilation. These fuel tank vent caps are primarily used on heating oil tanks, and come with an additional 1 ½” female top thread that allows them a float gauge to be easily screwed into the top of it.

There is no internal thread on the bottom of this oil tank vent cap, so two screws are provided either side of the cap to allow you to cut into the male thread on the tank and hold it in place.

The Piusi K600/4 Digital Fuel Flow Meter is designed for counting the amount of diesel or oil that has been dispensed and giving the user a visual indication of this on its electronic display. With a maximum flow rate of 150 litres per minute, this diesel flow meter is an ideal metering option for higher flow diesel transfer applications where larger quantities of fuel are being handled.

The Piusi K600/4 fuel counter meter is reliably manufactured in Italy and benefits from high levels of accuracy in its reading. These oil and diesel fuel flow meters also have an incorporated inlet filter to remove any large debris before it enters the meter body.

The SAMOA Flowstar electric oil dispensing trolley is a mobile unit ideal for delivering oil from a drum to anywhere in the workshop. The unit is compromised of a trolley, fitted with a self priming gear pump, 3 metre suction hose, 3 metre delivery hose and a metered dispensing nozzle.

The nozzle itself has an integrated flow meter which has a high accuracy of +/- 0.5%. The nozzle valve has a cam actuated piston-valve, designed for unrestricted flow and superb control of the fluid being dispensed.

70 or 100 litre waste oil gravity collection units From SAMOA. Discharge is done connecting the unit to a wall mounted discharge pump kit through a hydraulic coupler located at the bottom of the reservoir (PURCHASED SEPERATELY).