Brass Solenoid Valve

The Piusi Cambiaolio Oil Extractor Pump is a portable, oil extraction unit designed for use in small workshops where clean, spill-free oil removal from vehicles is required. With these Piusi oil extractors, there is no need to lift the vehicle or to remove the sump plug, as the Cambiaolio’s probes insert into the dipstick port, allowing the oil to be sucked from the engine sump. The waste oil is collected in a 12 litre container, which is mounted on the wheeled trolley.

The Piusi Suzzara Blue Electric AdBlue™ Drum Pump is designed for the dispensing of AdBlue™ (DEF) specifically from a drum trolley. Thanks to its stainless steel plate and integrated locking bracket, this Adblue™ transfer pump is mounted securely onto the side of a drum trolley, enabling the pumping system to be moved with the drum wherever the dispensing point is. This AdBlue drum pump also benefits from a robust and sturdy roll bar enclosure, which protects the pump from accidental impact.

Designed as a ready to go solution for the dispensing of AdBlue™ specifically from a barrel, this electric AdBlue™ pump comes with a self-priming membrane Piusi AdBlue™ pump, manual nozzle, delivery and suction hose and AF2 Trisure drum connector. It also equipped with a large practical hose holder allowing the hose to be rolled securely and neatly and a nozzle holster with a removable drip cup for easy cleaning.

The Samoa Pumpmaster 2 3:1 Ratio Air Operated Drum Pump Trolley is designed to conveniently deliver oil anywhere within a workshop where compressed air is available. The kit is comprised of a sturdy trolley, 3 metre delivery hose, suction hose, Pumpmaster 2 3:1 oil pump and a metered dispensing valve. Unlike other drum pumps, this kit has the pump sited on a pump plate fixed to the trolley, which enables quick and mess free changing of the drum.

This kit is intended to be used with 205 litre drums. Optional 10 metre hose reel.

SAMOA Reelmaster RM-12CL individually enclosed hose reel for synthetic and mineral oils.

• Corrosion resistant aluminium enclosure form a very rigid and stable structure, with light weight and attractive design.
• Fatigue resistant steel spring for years of durable performance and even load when pulling and recoiling the hose.
• Full port shaft and swivel for no restrictions.
• Spool mounted on two permanent lubricated and sealed ball bearings to reduce torque load on spring for smooth retraction and longer life.
• Large effective radial latching area for easier operation.
• Positionable mounting brackets to accommodate any method of mounting.
• Two large lateral service windows facilitate common maintenance operations.
• Hose reels with hose include 0.8 m inlet hose.

Hose length: 10, 15 or 18 metres

Hose Internal Diameter: 1/2"

Connecting Hose Inlet: 1/2" BSP (M)

Delivery Hose Outlet: 1/2" BSP (M)

Pressure Rating: 160 bar

Weight: 19-22kg (with hose)