Brass Hose Swivel

The Oil Lifter is designed for domestic heating oil applications when a higher than normal lift is required. The system sucks up the oil from the tank and stores it in its 3.5litre reservoir that then feeds the boiler. The internal suction solenoid pump ensures continuous oil supply to the heating system. If the oil lifter is required to be fitted inside a building then the optional drip tray with leak detector is required.

This Cim-Tek Filter Element is a replacement, 10 micron element for the Cim-Tek Hydrosorb fuel storage tank filter. This fuel tank filter element can be easily replaced to remove water and debris out of fuel continually.

This element is suitable suitable for the 70063 Cim-Tek Filter.

This high quality diesel transfer pump from FMT Swiss AG is manufactured from shock resistant Die-cast aluminium with extremely small tolerances. The small tolerances of this pump allow for great suction & pressure performance.

Fitted with an on/off switch, integral bypass & siphon protection, this 230v transfer pump is designed for a long service life and is capable of a 5 metre suction. The pump head is also rotatable 90 degrees in any direction, which gives the pump flexibility to be used in a wide range of applications.

This transfer pump from FMT has an encapsulated electric motor, which in case of extreme temperature fluctuations, largely prevents the formation of condensed water and of short-circuits resulting thereof.

Specification - 

Encapsulation of the electric motor, 

1.8 metre cable

1" BSP Inlet / Outlet

Self Priming Vane Pump

100 Litres per minute maximum flow rate

Up to 2.2 bar discharge pressure

5 Metre maximum suction height

Suitable for Fuel oils & Diesel

230v 50hz

Thermal Protection

IP54 Safety rating

FKM/NBR Seals

3 year warranty

Manufactured in Spain, the SAMOA Polaris series Diesel Cube is fitted with the high quality 230v Polaris transfer pump and includes a 3 digit flow meter, 4 metre delivery hose with swivelled outlet and automatic nozzle.

230v - 50hz - 3 amp - 500 watt

Maximum suction lift: 2.5m

Fluid inlet connection: 1" BSP (F)

1.8 Metre Cable & Plug

Meter valid for non-commercial applications only.

Order suction accessories separately.