Angle Filter and Strainer

The Piusi Steel Hose Tail is male hose barb with NBR seals. These hose tails can be used with hoses that have either a 19mm or 25mm inner diameter. 

Loxeal 55-03 Thread Locker is an anaerobic methacrylate adhesive designed for the thread locking of nuts and bolts of all types that may require dismantling. The Loxeal 55-03 thread locking sealant is available in a tool-box handy size bottle and a single shot sachet that can be thrown away after use.

Loxeal 55-03 thread locker still cures effectively when applied onto oily surfaces, and its sealing properties remain unchanged between -55°C to +200°C.

Please note curing rate and strengths depend on the assembly clearance, material, surfaces and temperature.

The Piusi Vacubox Oil Extractor is a powerful, wall mounted oil extraction unit, designed for small to medium workshops where clean, spill-free oil removal from vehicles is required. With these Piusi oil extractors, there is no need to lift the vehicle or to remove the sump plug, as the Vacubox’s probes insert into the dipstick port, allowing the oil to be sucked from the engine sump. The unit automatically stops once the oil extraction is complete.

The Hytek High Flow Diesel Transfer Pump is a low cost, high quality Fuel pump. The pump is suitable for Diesel or Biodiesel up to B100. 

Hytek 230v Diesel Pump Specification -

Self Priming, Direct Drive Vane Pump

230v 50hz

On / Off Switch

IP55 Weather Protection

2 Metre Power Cable

1" Inlet / Outlet

Duty Cycle: 30 minutes

80 L/min or 100 L/min maximum flow rate

Integral Bypass valve & Filter

Suitable for Diesel or B100

2 Year Warranty