Aluminium Hose Tail

The Piusi Clear Captor Steel Mesh Fuel Filter Element is to be purchased as a replacement element for the 125 micron, Piusi Clear Captor steel mesh particle fuel filter.

The Husky Safe-T-Break® couplings are designed to disconnect the refuelling system, so that the hose breaks off from the pump in the event where a vehicle drives off with the nozzle still attached to the fill point.

These Safe-T-Breaks® stop the whole pump system being pulled away from the installation, therefore preventing fuel from spilling out onto the forecourt. This type of Husky breakaway coupling is re-usable, and can therefore help to prevent damage and fuel spillages again and again. Watch this video on how to reconnect the coupling. 

The standard models of the Safe-T-Break® couplings are designed for use with diesel, with a 1" ATEX approved version available for petrol.

The SAMOA Mechanical Nutating Disk Flow Meter is suitable for high-accuracy monitoring of diesel & Comes fitted with a 4 digit resettable totaliser (999.9L Max) & a 6 Digit non resettable totaliser. This Mechanical Flow Meter from SAMOA is suitable for gravity fed applications with a minimum flow of 20 litres per minute & has a very low pressure drop.

The meter allows to orientate the inlet and outlet in four different positions.

Maximum working pressure: 10 bar

Flow range: 20 to 100 litre/min

Precision after calibration: +/- 1%

The SAMOA Directflo DF250 is a very reliable diaphragm pump for high volume transfer, dosing, spraying and dispensing a variety of fluids. The pump body is manufactured from rugged aluminium and has an aluminium air motor.

This pump is suitable for transferring Antifreeze solutions, Diesel, lubricants & waste oils and can be used as a stand alone pump, or in systems that include hose reels.

554 010 - Hytrel® Diaphragms, Acetal Balls & Viton Seals. Suitable for Antifreeze solutions.

554 030 - Buna-N Diaphragms & Balls. Suitable for Diesel, lubricants, waste oil evacuation and transfer.