Aluminium Filler Cap & Chain

The Piston Manual AdBlue™ Pump is designed for the cost effective and simple transfer of AdBlue™, also referred to as DEF, from a drum. Thanks to its manual operation, these AdBlue™ hand pumps are a popular choice when there is no power available, or when an electric AdBlue™ pump is not deemed necessary due to the small amounts of the fluid being dispensed.

Primarily used as an AdBlue™ drum pump, this mode comes compete with a telescopic downtube and drum connector, with a version also available with 2m delivery hose and spout.

The Piusi AdBlue™ Hose Reel through careful design has been constructed to be able to limit pressure loss and facilitate use, even for high flow AdBlue pump applications. These retractable hose reels can be supplied either as a bare hose reel or complete with hose, and are designed for mounting onto a wall or inside an AdBlue™ storage tank. 

The AdBlue hose reel without hose will include a 3/4” BSP M swivel inlet connection, a hose tail fitting and a hose fastening clamp for easy connection. 

The Piusi SB325_X AdBlue™ Magnetic Nozzle is designed for use in conjunction with the ELAFIX 40 adaptor in order to prevent the costly miss-filling of AdBlue into the diesel tank. This magnetic spout nozzle will only allow fluid to pass once it has been magnetically opened by an AdBlue magnetic adaptor fitted within the vehicle filler neck. Therefore, by using this AdBlue nozzle you cannot physically dispense into the wrong tank, as the diesel fill point will not contain a magnet.

The miss-filling of AdBlue™ into the diesel tank is a common issue and will be costly for the vehicle owner to put right. AdBlue™ is not compatible with many materials and miss-filling can corrode the pipework and components of a fuel system – resulting in thousands of pounds of damage, as well as having to pay for the removal of AdBlue™ from the tank.

This AdBlue dispensing nozzle also benefits from a breakaway spout mechanism. This means that if the vehicle accidently drives away with the nozzle still positioned in the vehicle's fill point, the spout will detach from the nozzle. This means that damage will be limited to the spout only which can be replaced as a spare part, and the AdBlue pump system connected to the storage tank will not be pulled away. 

Constructed of plastic but with a sturdy, stainless steel spout, this Piusi nozzle is a lightweight, cost effective alternative to the completely stainless steel automatic AdBlue™ nozzles on the market. Like these more expensive models, it still reliably shuts off dispensing when the AdBlue tank becomes full to prevent any overspill.

SAMOA Reelmaster RM-12L hose reel for Mineral & Synthetic lubricant oils.

• Very tough construction able to stand regular use and abuse in Intensive Duty applications.
• Fatigue resistant steel spring for years of durable performance and even load when pulling and recoiling the hose.
• Full port shaft and swivel for no restrictions.
• Spool mounted on two permanent lubricated and sealed ball bearings to reduce torque load on spring for smooth retraction and longer life.
• Large effective radial latching area for easier operation.
• Hose guide arm can be placed in different positions to accommodate any method of mounting.
• Narrow footprint allows accommodating more reels on the same surface.
• Hose reels with hose include 0.8 m inlet hose.

Hose length: 15 metres

Hose Internal Diameter: 1/2"

Connecting Hose Inlet: 1/2" BSP (M)

Delivery Hose Outlet: 1/2" BSP (M)

Pressure Rating: 160 bar

Weight: 24kg (with hose)