MTF 2000 Heating Oil Tank Gauge

The Plastic Fuel Tank Filler Cap is a cost effective solution to cap off male threads on fill points on fuel storage tanks, tanker faucets and valves. The main function of a tank fill point cap is to prevent dripping and to stop unwanted debris and water from entering into the fill pipe. Whilst they are primarily sold as a diesel or oil tank cap, they are a multipurpose solution that can be used with any compatible fluid.

The plastic fuel tank filler cap is a basic option when no additional security is required, and benefits from small lugs positioned around the cap and an alloy chain and clip to make it easier to fit and remove by hand. 

The TigerLoop® De-aerator effectively removes all gas/air bubbles from the oil system, helping to eliminate any oil pump and nozzle problems associated with gas/air in the oil.

The TigerLoop® oil de-aerator preheats the oil by absorbing heat from the boiler room and friction heat from the oil pump, which reduces the problems associated with cold oil, gives cleaner combustion and enables reduced oil consumption.

This oil de-aerator has a single pipe design, meaning that no oil is transported back to the oil tank, and that any oil not required by the burner is re-circulated within the TigerLoop®.

Nozzle Capacity: 110 Litres per hour

Oil Flow: 230 Litres per hour

Maximum return oil: 120 Litres per hour

De-Aerating Capacity: 8 Litres per hour

The Adam Pumps PA2 80 Diesel Transfer Pump is a low cost, high quality Fuel pump manufactured in Italy. 

Adam Pumps 230v PA2 80 Specification -

230v 50hz Pump

On / Off Switch

IP55 Weather Protection

2 Metre Power Cable

1" BSPP Female Inlet / Outlet

Duty Cycle: Continuous Duty

100 L/min maximum flow rate

Max pressure: 2.5 bar

Integral Bypass valve

-20/+50 °C maximum operating temperature

Suitable for Diesel Only

1 Year warranty

The Horn Tecalemit HDM60 Eco is a high-quality diesel dispensing pump with an integral HDA Cloud based fuel management system capable of tracking up to 4000 users/vehicles. The dispenser is 230v powered, and is fitted with an integral 55lpm transfer pump with a 4 metre delivery hose & automatic nozzle.

This kit comes with the Tecalemit full cloud based software, which stores up to 10,000 local transactions, allows up to 4,000 vehicles and drivers and comes complete with a fuel level sensor to show live readings of the fuel within the tank. Thanks to the included GSM modem and sim card, the data shown on the online portal can be kept live and accurate.

The system can be used with vehicle tags and driver codes, or just tags. This allows tracking for individuals, as well as vehicles. All of which is available to view on the online portal.

The questionnaire allows us to fully set the system up before delivery, allowing the unit and software to be ready to go as soon as it gets to you. The first year of the software hosting are included within the package.

The HDA system offers -

MPG Reports

Fuel Used per driver and vehicle

Vehicle groups or departments

Odometer entry

Messages to be sent to drivers when they next log in

Preset amount to be dispensed

Transaction totals

Filter by date range

Full traceability