AdBlue Transfer Pumps

The Piusi Shark (SQUALO35) AdBlue pump is the first submersible pump specifically designed  for dispensing AdBlue™ from an AdBlue™ tank, rather than for water transfer. Firstly, it's 35lpm flow rate is the proven speed in the market for refilling vehicles and off road machinery with AdBlue, due to the smaller tank size than diesel. Also, thanks to its integrated bypass valve, this submersible AdBlue pump can be used with a nozzle without the added cost of buying a pressure relief valve. 

Reduced overall dimensions guarantee easy installation of this compact electric AdBlue™ pump, ideal for when there isn't room for a pump in the tank cabinet. The low 30mm suction level of the Shark offers almost complete emptying of the tank, exceeding that of alternative submersible AdBlue Pump models, and has a strainer to remove any debris that may have entered and sank to the bottom of the tank to prevent it from entering the pump or the vehicle SCR system. Thanks to it being a regenerative turbine pump, it benefits from pressure building capabilities ten or more times that of a centrifugal pump with the same impeller diameter and speed.The Piusi Shark also has a built in pressure regulator that optimises flow rate to reduce unnecessary energy consumption, saving the user on energy costs.

A version of this Piusi pump is available with a 6 minute timer, to prevent the pump from dry running damage in the event of the user forgetting to turn it off when they have finished dispensing. 

The Submersible AdBlue™ Pump has been designed to be installed in large AdBlue™ tank installations where increased head pressure is required. This is a popular AdBlue™ transfer pump solution for tank manufacturers, as being submerged into the fluid means the storage tank cabinet does not need to make room for a pump to be fitted. 

These electric AdBlue™ pumps are built from anti-corrosive materials with a three stage impeller, wear resistant shaft and an anti-debris stainless steel strainer. The seals within this AdBlue™ pump - known as a DEF pump in the US - have been designed to keep the urea pure and the electrical cable gland seal has been reinforced. The pump’s motor has excellent cooling properties and can be used even when the top of the motor becomes partially exposed.

This Piusibox AdBlue™ Extraction Pump is a self-priming AC membrane pump kit designed for removing AdBlue™ from the vehicle’s tank in a service environment quickly and cleanly. Before refilling, the AdBlue™ tank of a vehicle is often emptied of any dregs to ensure that the new fluid added is not contaminated by any dirt that may have found its way into the vehicle. Another application that this AdBlue™ transfer pump kit is designed for is the vehicle scrap market where the fuels and fluids inside the vehicle need extracting prior to dismantling. 

Also included in this Piusi kit is a 2m small bore plastic tubing for inserting into the vehicle tank, and 2m of tubing for inserting into the container where the old AdBlue™ is collected. All components of the electric AdBlue™ pump kit can be neatly packed away within the handy and compact carry box that aids convenient transportation and storage. 

The SAMOA Directflo DF30 is a very compact and reliable diaphragm pumps for small volume transfer, dosing, spraying and dispensing a variety of fluids.

This pump is suitable for transferring Antifreeze solutions, Windscreen wash solutions, AdBlue and can be used as a stand alone pump, or in small systems that include hose reels.

This Piusi 24v and 12v Pump is designed for the portable dispensing of AdBlue (DEF) from a drum. Thanks to its 2m cable and clips for connection to the vehicle’s battery, this AdBlue drum pump is ideal for mobile applications where a drum needs to be moved to different dispensing locations or where mains power isn't available.

Complete with delivery hose, manual nozzle, suction downtube with strainer and 2” drum connector, this ready to use AdBlue transfer pump kit can be easily disconnected and moved between drums.

The Hytek IBC Mounted AdBlue Transfer Pump kit, is supplied with all parts to enable quick and easy transfer of AdBlue from an IBC. Neatly fitted to a bracket, this pump kit comes fitted with the choice of an Automatic, or Manual nozzle.

AdBlue Pump Kit Specification -

Self Priming Diaphragm AdBlue Transfer Pump with 1.8m power cable

230v

Bypass valve & On/Off switch

30 Litres per minute flow rate

20 minute maximum run time

6 Metre delivery hose

1.5m Suction hose with SEC connector

Manual Nozzle or Automtic Nozzle with stainless spout

Integrated hose nozzle holder

2 Year warranty

The Piusi Suzzara Blue 3 Basic is an improved and redesigned version of the market known Suzzara Blue AdBlue™ IBC Pump Kit.  This new stainless steel plated AdBlue™ transfer pump solution from the Italian manufacturer Piusi is different from competing products on the market thanks to its robust and sturdy roll bar enclosure, which protects the pump from accidental impact. Designed as a ready to go solution for the dispensing of AdBlue™ (DEF) specifically from an IBC, this AdBlue™ IBC pump kit comes with a self-priming membrane Piusi AdBlue™ pump, manual nozzle, delivery and suction hose and IBC connector. In response to market requirements, we also supply a “hybrid” version which comes with an automatic nozzle to shut off when the tank is full.

The Suzzara Blue 3 Basic AdBlue™ pump kit can be mounted securely onto the IBC with the integrated locking bracket to ensure the Piusi pump kit cannot be easily pulled off under force. It also benefits from a large practical hose holder allowing the hose to be rolled securely and neatly, and a nozzle holster with a removable drip cup for easy cleaning.

Depending on user requirements, this IBC AdBlue™ pump kit is available with a choice of low voltage or electric AdBlue™ pump. If you want to monitor how much you are dispensing, then the Suzzara Blue 3 Pro IBC AdBlue™ pump kit comes with the addition of a flow meter, as does the Suzzara Blue 3 Pure Pro AdBlue™ IBC Pump Kit also complete with a filter.

The SAMOA Directflo DF50 is a very compact and reliable diaphragm pumps for medium volume transfer, dosing, spraying and dispensing a variety of fluids.

This pump is suitable for transferring Antifreeze solutions, Windscreen wash solutions, AdBlue and can be used as a stand alone pump, or in medium systems that include hose reels.

The Hytek engineered AdBlue Drum Pump Kit is designed to mount to the top of drums for easy transfer of DEF. The kit is designed to fit AdBlue containers that require a Trisure Connector for sealing. The frame is easy to move from drum to drum and comes with all necessary parts.

Pump Kit Specification -

Self Priming Diaphragm pump with Bypass valve

IP55 Weatherproof rating

AF2 Trisure Connector with 3 part suction tube, up to 1050mm Long

Built in filter, venting system & non return valve

Pump available in 12v or 230v

6 Metre delivery hose

Manual nozzle

Nozzle holder with switch

2 Metre cables

20 Minute max run time

30 litres per minute flow rate

1 year warranty

The Piusi Suzzara Blue Electric AdBlue™ Drum Pump is designed for the dispensing of AdBlue™ (DEF) specifically from a drum. Thanks to its spring-loaded Stainless Steel plate, this Adblue™ transfer pump can be securely top mounted onto a drum, ensuring protection against any accidental impact that otherwise could knock the pump off the drum and cause damage.

Complete with delivery hose, manual nozzle, suction downtube and AF2 Trisure drum connector, this electric AdBlue™ pump can be easily disconnected and moved between AdBlue™ drums as a ready to dispense kit. It also benefits from an anti-drip nozzle holster for the clean storage of the nozzle when refilling has finished.

The Piusi AODD AdBlue™ Pump has been designed to use a thermoplastic diaphragm to transfer water and chemicals such as AdBlue (or DEF), antifreeze and screenwash. As this Piusi pump uses air in order to transfer the fluid, no mains connection is required. These AdBlue™ transfer pumps are often used in garages and workshops where air lines are already set up. The port size and flow rate for each model varies and ranges from 50 l/min to 220l/min for bigger installations.

The Piusi AdBlue Pumps are able to be used in Zone 2 potentially flammable environments.

The SAMOA Directflo DF100 is a very compact and reliable diaphragm pumps for high volume transfer, dosing, spraying and dispensing a variety of fluids.

This pump is suitable for transferring Antifreeze solutions, Windscreen wash solutions, AdBlue and can be used as a stand alone pump, or in large systems that include hose reels.