AdBlue Drum Hand Piston Pump

The Piusi Premium Rotary Manual AdBlue™ Pump is specially designed for the transfer of AdBlue™ (DEF) from an IBC, where there is no access to power or where the quantity dispensed is not high enough to warrant a more expensive electric pump.

Thanks to its careful design and Italian construction, this Piusi pump has a higher specification compared to other AdBlue™ hand pumps on the market in several ways. Benefitting from a Stainless Steel outer casing as opposed to plastic, this Piusi AdBlue™ pump kit is more durable, giving it a longer life span. It also has a much smoother operation for the user thanks to its rolling hand grip and quality internals.

Designed specifically as an AdBlue™ IBC pump, this IBC plate mounted kit comes complete with suction and delivery hose, with swivel dispensing spout with on/off valve to close off the hose to prevent dripping. This kit is able to fitted to top or lower IBC bars, which makes it ideal for applications when the IBC is on a bund and fitting the AdBlue™ transfer pump to the top bar would be too high up to operate.

The Piusi K400 digital fuel flow meter is designed to measure the quantity of diesel, oil or windscreen fluid that has been used. This accurate oval gear fuel counter meter is popular for the dispensing of oil in garage and workshop environments, as well as the low flow diesel transfer applications.  Due to the operating principle of the oval gears Piusi K400 provides high degree of accuracy when measuring and reduced loss of pressure.

There are two separate versions available of the Piusi K400 fuel flow meter; one for use with diesel and oil, and another for windscreen fluid.

The SAMOA Polaris Series transfer Pump is a self priming diesel pump with self-adjustable vanes, Pump body made of cast-iron with rustproof treatment, rotor of sintered steel and vanes of acetal resin.  The pumps include a by-pass valve and a built in filter with easy access for cleaning.  The pump can be mounted vertically or horizontally and has 1.8m cable with plug.

Inlet/outlet connection: 1" BSP (F) or flange coupling

Maximum suction lift: 2.5m

Pressure: 1.7 bar

230v - 50hz - 3 amp - 500 watt

Electric AC motor with IP55 protection, allow continuous operation duty.

On/off switch and fuse.

The Cim-Tek 70062 Filter Element is a replacement, 10 micron cannister filter element for use with Diesel and Petrol fuel. The 70062 Hydrosorb Spin-on Filters, designed for fuel pumps and dispensers, are versatile and economical for agricultural and low-volume commercial applications.

The 260 series Cim-Tek filters should not be used with Aviation fuels.

This element is suitable suitable for the 70062 Cim-Tek Filter.