AdBlue Equipment

The Piusi 3D AdBlue™ Filter is specifically designed for removing debris and crystallisation from AdBlue™. Whilst AdBlue™ is a pure solution, contamination can occur during the filling and transferring process, which can damage the vehicle’s SCR system. An AdBlue™ filter is therefore important to prevent damage to your vehicle and keep it within warranty. This model has a highly efficient technopolymer filtering element within a protective polyamide casing, and has 1” BSP fittings for easy connection to the installation.

Please note: It is recommended that the AdBlue™ filter is changed once a year.

The Piusi Ocio Fuel Tank Gauge is a continuous reading, hydrostatic digital tank level monitoring device designed primarily for commercial diesel fuel tanks. Once calibrated using the specific tank measurements, the Piusi Ocio electronically displays the tank level reading in mm, litre or percentage depending upon the user preference.

This fuel tank level gauge allows the user to configure low and high level status alerts, which upon activation causes the LED screen to flash to visually alert the user that the level has been reached for them to take action. It also benefits from two configurable relays for sending the high/low level alert statuses to other equipment e.g. a low level tank alarm for an audiable alert, a remote building management system or to the pump on the tank to turn it off e.g. in day tank filling.

The Piusi Ocio gauge is a versatile fuel tank level indicator suitable for use on vertical cylindrical, horizontal cylindrical and rectangular tanks up to 4m high. Whilst the standard model is designed primarily for diesel, there is an AdBlue™ tank gauge version available and a kit to make the standard Ocio compatible with oil popular in garage and workshop environments. There is also a 4-20ma output model available to allow you to send the level readings to a building management system, whereas the standard model would only send the set high/level alarm statuses to the BMS.

The Watchman Sonic Oil Tank Gauge, although suitable for most fluids, is primarily designed as a heating oil tank gauge. Consisting of a transmitter that fits to the top of the tank and electronic receiver that has a 200 metre range, the Watchman fuel tank gauge measures the fuel contents and transmits it to the receiver plugged in inside the building.

This domestic oil tank level monitor also alerts the receiver when the tank level falls below 10%, giving the user notice of the need to order a fuel delivery without them having to access the tank outside to check. These oil tank level indicators are suitable to be installed on both plastic and steel tanks, providing that it does not exceed their limit of 3 metres in height.

The Quantum Battery Operated Hydrostatic Fuel Tank Gauge is a new addition to our commercial tank gauge range and has a number of beneficial features. Designed for showing the tank’s contents in litres/gallons, this hydrostatic fuel tank contents gauge has a push to read button, which generates a battery powered air compressor to gain the current reading. The large square mechanical display also shows a battery power meter – enabling you to see when the batteries for your tank gauge need changing.

The Quantum fuel tank level gauge can be used with any shape tank with a maximum tank height of 8 meters, has a high accuracy of +/-1% and can be positioned up to 200m away from the tank. This gauge is ideal for industrial, process plant and chemical applications, and can be used with water, diesel, lubricants and tanks containing more aggressive fluids.

Please note, that upon order of this gauge you will be emailed a questionnaire, you will need to fill this in and send it to sales@northerntankstore.co.uk. As calibrated fuel tank gauges are made to order, there may be a lead time of 5-10 working days.

The Quantum Manual Hydrostatic Fuel Tank Gauge is new to our range of commercial tank gauges and boasts a number of beneficial factors – one of which being it requires no power, and has a hand pump mechanism which is used to reveal the current tank contents.

Constructed from 304 grade stainless steel, this fuel tank contents gauge gives readings in litres/gallons, is suitable for any shape tank with a maximum height of 8 meters and has a high accuracy of +/-1% at full scale. Please note, this fuel tank level gauge must be calibrated to the size of your tank.

The Quantum fuel tank gauge is ideal for heavy duty, industrial and plant applications, and can be used with water, diesel, kerosene, lubricants and tanks containing more aggressive fluids.

Please note, that upon order of this gauge you will be emailed a questionnaire, you will need to fill this in and send it to sales@northerntankstore.co.uk. As calibrated fuel tank gauges are made to order, there may be a lead time of 5-10 working days.

The Unitel Hydrostatic Fuel Tank Gauge from Afriso Euroindex is a pneumatic tank level indicator designed for showing the amount of fuel oil, diesel or AdBlue™ remaining in a storage tank. It has a spring loaded plunging mechanism that when released causes the needle to settle on the contents left within the storage tank. As a calibrated gauge, this is then displayed clearly in litres on its large mechanical face. This fuel tank level gauge is compatible with horizontal, vertical, cylindrical and rectangular tanks, with heights between 900mm and 3000mm for diesel and up to 2500mm for water/AdBlue, making the Unitel a highly popular and versatile tank level indicator.

The Unitel fuel tank gauge also benefits from an adjustable second needle for setting a level parameter, which you can then use to identify the tank has hit the level at which you have decided you need to reorder fuel. Supplied in an impact resistant casing, the Euroindex contents gauge can be easily wall or tank mounted.

Please note, that upon order of this gauge you will be emailed a questionnaire, you will need to fill this in and send it to sales@northerntankstore.co.uk. As calibrated fuel tank gauges are made to order, there may be a lead time of 5-10 working days.

The Unitel Hydrostatic Fuel Tank Gauge from Afriso Euroindex is a pneumatic tank level indicator designed for use primarily on fuel oil and diesel tanks, but also used as an AdBlue tank gauge. It has a spring loaded plunger that you pull and release until the needle settles on the contents left within the storage tank, which is then displayed clearly as a percentage on its large mechanical face.

This fuel tank level gauge is suitable for horizontal, vertical, cylindrical and rectangular tanks, with heights between 900mm and 3000mm for diesel and up to 2500mm for Water/AdBlue , making the Unitel a highly popular and versatile tank level indicator.

The Unitel fuel tank gauge also benefits from a handy adjustable second needle for setting a level parameter, which you can then use to indicate the level at which you need to reorder fuel. Supplied in an impact resistant casing, the Euroindex contents gauge can be easily wall or tank mounted.

The Cleanfill 2" Overfill Prevention Valve from Lafon can be fitted to a tank as a piece of safety and environmental protection equipment. This overfill protection device can be used on fuel and diesel storage tanks that are filled by gravity flow or a pressure pump system. When the tank is full, the valve will close preventing any further fluid from being dispensed into the tank. There is also a version available to be used on AdBlue™ storage tanks, a fluid which is known as DEF in America and other countries.

The CTS AdBlue™ Tank und Alarm is an economy, entry level, battery powered AdBlue™ tank alarm system for alerting the user to fluid being detected between the inner tank and the outer bund. If only a bund alert is needed for your tank, this bund alarm is a simple, cost-effective solution and doesn't involve the other warnings associated with a fuel tank level alarm. A red LED will flash and a 90db alarm will sound to alert the user to fluid being detected in the bund - which can be caused by a tank rupture/leak or rainwater collecting in the bund - meaning your bund will need cleaning and/or emptying.

This battery powered AdBlue&trade bund alarm allows 72 hours of full alarm mode, making it ideal for unmanned sites and those with site closure on weekends. Further features include a weatherproof enclosure and test and alarm mute buttons to silence the sounder.

The CTS AdBlue™ tank high level alarm is a battery powered, economical, entry level tank alarm solution for use on an AdBlue™ tank. This tank alarm is ideal for use on portable installations or when mains power is unavailable, and is used to alert the user that the tank has reached its set high level to avoid an overfill situation.

This AdBlue™ tank level alarm has simple operation meaning batteries will last 72 hours or more when in full alarm mode - ideal for unmanned sites and sites that are closed over the weekend. With test and alarm mute functions, a weather proof enclosure, 5m probe for AdBlue™ and fittings for plastic or steel tanks, this is the ideal solution for an AdBlue™ overfill tank alarm.

This AdBlue™ tank alarm comes with three cut to size stickers for you to select and stick next to the LED, for making it clear to the user what the alarm siren is indicating. There are two labelled high and low, and one that is blank in case you wish to name it something else with permanent marker.

The CTS single channel fuel tank alarm system provides the user with the choice of setting the alarm to alert of either a high level, low level or bund leak depending upon their requirements. This level and bund alarm is a simple and cost effective solution when the user only requires to be alerted of one scenario, therefore making the multi-zone tank level alarm over-specified.

Available in either mains or battery power, the single channel fuel tank alarm has a clear, descriptive seven segment LED display that informs the user of the activated tank state. Both versions feature a test button that will activate the 90dB sounder and flash the display showing the current configuration of the tank level alarm, and a mute button to silence the sounder. The battery powered version has a low battery warning to give notice that the battery needs changing.

The mains powered version has the additional feature of a volt-free relay for connecting the fuel storage tank alarm to another piece of equipment on-site such as a building management system, or another mains powered single channel alarm allowing the alarm status to monitored remotely for example in the office. Whilst commonly used as a diesel tank alarm, it is also suitable for use with a range of fluids such as water, waste oil and chemicals

The CTS Battery Operated Multi-Compartment Fuel Tank Alarm system has three functions; to detect and warn of a fuel storage tank overfill, a high/low liquid level and a bund leak. If the tank level alarm identifies that any of these states have occurred, the zone in question will illuminate on the alarm’s screen, and a loud siren and flashing red light will go off. When its battery is low, this level bund alarm will sound a single beep every minute to alert the user of this.

Thanks to being battery powered, these fuel tank alarms are designed to be installed on isolated or portable systems, and each zone can be configured allowing the alarm to be customised by the installer. Options are available that come with three relays, allowing additional equipment to be connected to the tank level alarm such as larger alarm systems or building management systems for remote monitoring.

If you need a tank level alarm for a fluid other than diesel or light oil, also available are a water and chemical alarm probe, and a high viscosity oil tank level probe – which is also suitable for AdBlue as well as high viscosity oils.