AdBlue Equipment

The Stainless Steel Swivel with Viton Seals is designed for where a swivel joint is required to connect rigid and flexi pipework, or it can be fitted onto the inlet of a nozzle from the delivery hose. These stainless steel swivels are suitable for use with diesel fuels, AdBlue® and chemicals, with a max pressure of 25 bar.

The Piusi Polypropylene Hose Tail is a 90° degree hose tail for hose connections of 19mm. It is ideal for use with AdBlue™, and has been designed for use with the Piusi SEC IBC Connectors.

The Plastic Hose Tail is available in two alternative versions. It can be supplied as a standard Male or Female BSP hose barb, or as a 90° version, which can also be Male or Female. These Piusi plastic hose tails are designed to be used during transfer of AdBlue™, and are suitable for hoses with a 19mm inner diameter.

Stainless Steel Hose Tail with swivel is a Male BSP fitting with a 19mm hose barb for 3/4" hose. Suitable for use with AdBlue.

The Stainless Steel Hose Tail is a heavy duty pattern, and is designed for use with more aggressive fluids such as AdBlue™. These hose tails can be connected to hoses that have inner diameters from 19mm up to 50mm. There is an option for this hose barb to come with a swivel connection.

Smaller sizes available on request.

The Piusi SEC IBC Connectors have been designed by Piusi to overcome issues associated with the traditional lever based CDS connector.

These IBC connectors work by screwing the valve open/closed without acting any angular pressure on the IBC connection point. Once connected, the SEC valve ensures that the AdBlue™ is not contaminated by the surrounding environment of the IBC tank. These come as standard with the Suzzara Blue IBC AdBlue pump kits.

This Stainless Steel Solenoid Valve is a direct acting valve, meaning that no pressure has to be applied to operate, suitable for a range of fluids including AdBlue™, fuels, oil and water. As a normally closed solenoid valve, the liquid flow is shut off until the valve is activated. When the coil integral to the valve becomes energised by an electrical current, the valve opens to enable the flow of liquid through the pipeline.

This stainless steel solenoid valve is therefore designed for situations where the fluid only needs to be released at certain intervals, for example to feed a generator with fuel from the back up storage tank. The valve could also be wired into a pump to make sure that fluid only enters the pipework from the tank when the pump is activated.

The Stainless Steel Lockable Lever Ball Valve is designed for applications where brass is not suitable. This version of ball valve is therefore used for installations with more aggressive fluids such as AdBlue™ and chemical fluid pipelines. The lockable lever ball valves can be locked using a padlock in either the open or closed position, and the locking device covers the stem nut, which means that if the padlock is on, the lever is impossible to remove.

This valve us fatted with an Anti-blowout stem and PTFE seals. PN63 Rating, Temperature -10°C to 180°C.

The Stainless Steel Wafer Swing Check Valve is a cost effective non-return valve, which only allows flow in one direction. Designed to fit in between flanges, these swing check valves are a compact solution for installations where space is an issue.

These stainless steel wafer valves comprise of a stainless steel body, viton seals, seats and an o ring, and the smaller surface area make it a cost effective alternative to equivalent valves.

The Stainless Steel Foot Valve and Strainer is a spring loaded non return valve, which has the additional benefit of ensuring that the fuel being drawn is free from any large particles that could damage the pumping system. These foot valves are ideal for use on corrosive fluids that need to be kept free of material contamination.

The Stainless Steel Check Valve is a spring loaded, non return valve constructed of stainless steel 316. These non return valves have F x F internal threads, and can be supplied in ¾” and 1” BSP.

The Stainless Steel Basket Strainer can be fixed to suction lines or non return valves, to filter any large particles that may damage the components in chemical systems. These basket strainers are constructed of heavy duty stainless steel, and have machined turned threads.