AdBlue Equipment

The OLE SmartGuard remote tank level monitor is designed for use on static and mobile fuel tanks to allow tracking and fuel level monitoring. The SmartGuard is fitted with a sim card which is connected to an online portal where the tank contents can be viewed. This provides details on the location of the tank, as well as a notifications or any sudden fuel loss and a low level alert.

Please note there is an ongoing yearly charge for the use of the sim card/web portal. The first year is included in the price.

The Pedrollo TOP MULTI-AD is a high quality multi stage submersible pump manufactured in Italy. The TOP MULTI-AD is designed to pump clean liquid which is defined according to ISO 22241 as AUS 32 (Aqueous Urea Solution 32.5%).

This liquid is equivalent to other commercial trademarks known as - AdBlue, DEF & Arla 32.

Delivery Body - Glass fibre reinforced technopolymer, complete with threaded ports in compliance with ISO 228/1.

Suction Filter - Glass fibre reinforced technopolymer.

Stage Casing - Glass fibre reinforced technopolymer.

Impeller - Noryl FE1520PW.

Diffuser - Noryl FE1520PW with anti-wear ring.

Vane Diffuser - Glass fibre reinforced technopolymer.

Motor Casing - Stainless Steel AISI 304.

Motor Casing Plate - Stainless Steel AISI 304.

Motor Shaft - Stainless Steel AISI 304.

Shaft with Double Seal - Silicone Carbide (stationary ring), Graphite (rotational ring) & EPDM

Outlet - 11/4" F BSP with Flap-check valve

The Talon AdBlue dry break coupler is designed to open and close automatically when the delivery vehicle is connected or disconnected to the unit. This ensures minimal loss of AdBlue upon disconnecting, saving time and money cleaning up spills.

This tank coupler is manufactured from a sturdy stainless steel and is interchangeable with many of brands of coupling.

The SAMOA portable electric AdBlue dispensing trolley is designed for the dispensing of AdBlue specifically from a drum trolley. The Solura series AdBlue pump is securely mounted to the side of the drum trolley, which enables the whole pumping system to be moved with the drum wherever the dispensing point is. This is made even more convenient with the optional 15 metre power cable reel, making it much easier to refill AdBlue in more remote areas of the workshop.

This portable AdBlue trolley is an all in one solution for dispensing AdBlue from drums. It comes fitted with a 230v Solura series AdBlue pump, Passenger car type automatic nozzle, Trisure connector, delivery & suction hose. The optional cable reel allows dispensing up to 15 metres away from the power source whilst keeping the power cables tidy.

The Hytek IBC Mounted AdBlue Transfer Pump kit, is supplied with all parts to enable quick and easy transfer of AdBlue from an IBC. Neatly fitted to a bracket, this pump kit comes fitted with the choice of an Automatic, or Manual nozzle.

AdBlue Pump Kit Specification -

Self Priming Diaphragm AdBlue Transfer Pump with 1.8m power cable

230v

Bypass valve & On/Off switch

30 Litres per minute flow rate

20 minute maximum run time

6 Metre delivery hose

1.5m Suction hose with SEC connector

Manual Nozzle or Automtic Nozzle with stainless spout

Integrated hose nozzle holder

2 Year warranty

The Hytek IBC Mounted AdBlue Transfer Pump kit, is supplied with all parts to enable quick and easy transfer of AdBlue from an IBC. Neatly fitted to a bracket, this pump kit comes fitted with an Automatic nozzle & Digital flow meter.

AdBlue Pump Kit Specification -

Self Priming Diaphragm AdBlue Transfer Pump with 1.8m power cable

230v

Bypass valve & On/Off switch

30 Litres per minute flow rate

20 minute maximum run time

+/- 1% Accuracy (Flow Meter)

6 Metre delivery hose

1.5m Suction hose with SEC connector

Automatic shut off nozzle with stainless spout

Integrated hose nozzle holder

2 Year warranty

This self priming AdBlue pump is ideal for transferring bulk AdBlue (DEF) from Drums or IBC's into smaller containers or tanks. This AdBlue transfer pump comes fitted with an On/Off switch & a 1.8 metre power cable.

Pump Specification -

1" Male BSPP Inlet / Outlet, Supplied with 3/4" Hose Tails

Integral Bypass Valve

Max Run Time: 20 Minutes

Maximum Flow Rate: 35 Litres per minute

1.8 Metre power cable

On/Off Switch

230v

1 Year warranty

SAMOA Solura Blue 24v DC multi-diaphragm pump with no mechanical seals designed for dispensing AdBlue®/DEF and other water-based non corrosive products. Pump is self-priming and has a by-pass valve. Electric motors have IP55 protection and include on/off switch, fuse and 2m cable and crocodile clips.

Electric motor power: 310w

Inlet/outlet connection: 1" BSP (M)

Maximum suction lift: 1.8m

Maximum delivery pressure: 1.6 bar

Maximum delivery: up to 32 l/min

SAMOA Solura Blue 12v DC multi-diaphragm pump with no mechanical seals designed for dispensing AdBlue®/DEF and other water-based non corrosive products. Pump is self-priming and has a by-pass valve. Electric motors have IP55 protection and include on/off switch, fuse and 2m cable and crocodile clips.

Electric motor power: 260w

Inlet/outlet connection: 1" BSP (M)

Maximum suction lift: 1.8m

Maximum delivery pressure: 1.6 bar

Maximum delivery: up to 32 l/min

SAMOA Solura Blue 230v 50Hz AC multi-diaphragm pump with no mechanical seals designed for dispensing AdBlue®/DEF and other water-based non corrosive products. Pump is self-priming and has a by-pass valve. Electric motors have IP55 protection and include on/off switch, fuse and 2m cable with plug.

Electric motor power: 400w

Inlet/outlet connection: 1" BSP (M)

Maximum suction lift: 1.8m

Maximum delivery pressure: 1.6 bar

Maximum delivery: up to 30 l/min

The Piusi MK325 AdBlue™ meter is a new and innovative pulse meter engineered for high accuracy AdBlue™ dispensing. This AdBlue™ - or DEF as it is known in the US - pulse meter is MID approvable, making it suitable for use in commercial refuelling pumps and weights and measure systems for the retail market, when approved as a complete unit. The bi-directional AdBlue™ pulse meter from Piusi has an AISI 304 stainless steel body, PEEK gears for maximum ruggedness and IP67 graded protection against dust and water.

The Piusi Turbinox AdBlue™ Pulse Meter accurately measures the amount of AdBlue™ but also diesel, lubrication oil, anti-freeze and windscreen wash liquid, that has been used at a maximum flow rate of 40lpm. These Piusi pulse meters have no electronic display, as they are generally used with external systems allowing the amount of fuel consumption to be accessed elsewhere. The Turbinox AdBlue™ flow meter with pulse output can be used in conjunction with a non-commercial AdBlue pump either part of or externally inline. These diesel pulse meters can also be used in industrial applications.