9000 Litre Titan FuelMaster Advanced Bunded Dispensing Tank

This Oil Spill Kit contains all you need to simply and quickly deal with an oil spill in a portable and easy to access clip close carrier. Designed to absorb all hydrocarbon based oils, fuels, lubricants and petroleum based liquids, this emergency spill kit is a must have for wherever fuel or oil is stored, delivered or handled. Versions are available to clean up 10litres, 20litres and 40litres depending upon the individual requirements.

This Oil Spill Kit includes oil spill socks for containing the spill and stopping it spreading. These booms have a very flexible outer skin to ensure each have a high fluid absorbency of 7.5litres and high spill retention by moulding to the surface they are laid on. It also includes oil spill pads for absorbing the remaining fluid, each with a capacity of 1.1litres.

Due to their hydrophobic nature, the spill absorbents do not soak up water making them ideal for applications where water and oils must be separated. The spill pads remain buoyant in water, even when fully saturated, allowing them to absorb oil off the top.

The Husky Safe-T-Break® couplings are designed to disconnect the refuelling system, so that the hose breaks off from the pump in the event where a vehicle drives off with the nozzle still attached to the fill point.

These Safe-T-Breaks® stop the whole pump system being pulled away from the installation, therefore preventing fuel from spilling out onto the forecourt. This type of Husky breakaway coupling is re-usable, and can therefore help to prevent damage and fuel spillages again and again. Watch this video on how to reconnect the coupling. 

The standard models of the Safe-T-Break® couplings are designed for use with diesel, with a 1" ATEX approved version available for petrol.

Aquafighter Large Canvas is a fuel tank water absorber designed to remove both free and suspended/emulsified water out of diesel fuel directly in the tank, therefore providing a complete solution for water contamination. Aquafighter Canvas comes in two sizes, Medium and Large, depending on the size of the fuel storage tank. The diesel and oil tank water absorber is typically used for removing water from bulk fuel storage tanks and generator tanks.

The medium size is suitable for a tank with a capacity of up to 5,000 litres with the access of at least 12cm and the large size for a capacity of up to 10,000 litres with the access of at least 16cm. Both sizes of the fuel tank water absorber can be manipulated through tank opening but not through a long pipe.

The bound and free water in a storage tank can cause issues associated with microbial growth, known as "diesel bugs", which is responsible for creating a nasty sludge that blocks filters, damages your equipment, causes engine system corrosion and poor fuel efficiency. The Aquafighter water absorber eliminates these problems by reducing the water content levels down to 75ppm to meet the EN590 diesel fuel standards (200ppm) and saving you costly damage and downtime. Unlike other solutions on the market, this diesel tank water absorber not only removes free water but also separates and captures the suspended and emulsified water, which often gets left to cause serious damage to your vehicles and equipment. 

By doing this, the Aquafighter Canvas fuel tank water absorber provides numerous benefits including preventing diesel bug from forming, reducing filter replacements and need for tank cleaning and protecting the tank from corrosion. 

Please note: If this is your first time using Aquafighter, we recommend buying 2 units. The first can be added to absorb the current water, which may become full quickly if there is a large problem with water. The second to be added once the other has been removed to act as a prevention against future water content.