-
sales@northerntankstore.co.uk
- Call: 01748 835276
-
Heating Oil Tanks
- Single Skin Tanks
- Fire Rated Oil Tanks
-
Bunded Oil Tanks
- Steel Bunded Oil Tanks
- Plastic Bunded Oil Tanks
- Slimline Bunded Oil Tanks
- Low Profile Bunded Oil Tanks
- 500 & 650 Litre Bunded Oil Tanks
- 1000 Litre Bunded Oil Tanks
- 1200 & 1225 Litre Bunded Oil Tanks
- 1300, 1400 & 1500 Litre Bunded Oil Tanks
- 2000 Litre Bunded Oil Tanks
- 2500 Litre Bunded Oil Tanks
- View All Bunded Oil Tanks
- Heating Oil Accessories
- Oil Tank Offers
- View All Heating Oil Tanks
- Diesel Tanks
- Petrol Tanks
- AdBlue Tanks
- Water & Chemical
- Waste & Lube Oil
- Septic Tanks & Water Treatment
- Settlement Tanks
- General Storage
- Spill Control
- Tank Accessories
-
Heating Oil Tanks
- Single Skin Tanks
- Steel Single Skin Tanks
- Plastic Single Skin Tanks
- Slimline Single Skin Tanks
- Low Profile Single Skin Tanks
- Fire Rated Oil Tanks
- Steel Fire-Proof Oil Tanks
- Plastic Fire-Proof Oil Tanks
- Bunded Oil Tanks
- Steel Bunded Oil Tanks
- Plastic Bunded Oil Tanks
- Slimline Bunded Oil Tanks
- Low Profile Bunded Oil Tanks
- 500 & 650 Litre Bunded Oil Tanks
- 1000 Litre Bunded Oil Tanks
- 1200 & 1225 Litre Bunded Oil Tanks
- 1300, 1400 & 1500 Litre Bunded Oil Tanks
- 2000 Litre Bunded Oil Tanks
- 2500 Litre Bunded Oil Tanks
-
Diesel Tanks
- Dispensing Tanks
- Steel Dispensing Tanks
- Plastic Dispensing Tanks
- Dispensing Containers
- Fuel Storage Tanks
- Steel Fuel Storage Tanks
- Plastic Fuel Storage Tanks
- Cylindrical Fuel Storage Tanks
- Fuel Bowsers
- Road Legal Tow Bowser
- Site Tow Bowsers
- Fixed Skid Bowsers
- Generator Tanks
- Static Generator Fuel Tanks
- Transportable Generator Tanks
- Generator Stores
- Petrol Tanks
- AdBlue Tanks
-
Water & Chemical
- Potable Water Tanks
- 1-100 Litre Potable Water Tanks
- 101-650 Litre Potable Water Tanks
- 651+ Litre Potable Water Tanks
- Water Bowser Tanks
- Trailed Water Bowsers
- Fixed Skid Bowsers
- Water Storage Tanks
- 1-100 Litre Water Storage Tanks
- 101-650 Litre Water Storage Tanks
- 651+ Litre Water Storage Tanks
- Water Tank Accessories
- Water Pumps & Hoses
- Water Tank Fittings
- Waste & Lube Oil
- Septic Tanks & Water Treatment
- Settlement Tanks
- General Storage
- Spill Control
-
Tank Accessories
- Flow Meters
- Mechanical Flow Meters
- Digital Flow Meters
- Pulse Meters
- Transfer Pumps
- Diesel Transfer Pumps
- Oil Transfer Pumps
- AdBlue Transfer Pumps
- Water Pumps
- Petrol Pumps
- Chemical Pumps
- Hand Pumps
- Electric Pumps
- Fuel Nozzles
- Diesel Nozzles
- Oil Nozzles
- Petrol Nozzles
- AdBlue Nozzles
- Water Nozzles
- Chemical Dispensing Nozzles
- Automatic Nozzles
- Manual Nozzles
- Tank Alarms & Overfill Valves
- Alarms
- Probes
- Overfill
- Fill Point & Vent Fittings
- Fuel Tank Fill Caps
- Fuel Tank Vent Caps
- Hose & Hose Reels
- Delivery Hose
- Suction Hose
- Hose Reels
- Hose Fittings
- Breakaway Couplings
- Camlock Couplings
- Tank Gauges
- Float Type Gauges
- Hydrostatic Gauges
- Electronic Gauges
- Sight Gauges
- Pipe Fittings
- Brass Fittings
- Stainless Steel Fittings
- Steel & Iron Fittings
- Fuel Management Systems
- Management Units & Systems
- Software & Accessories
- Valves
- Gate Valves
- Lever Ball Valves
- Pressure Valves
- Check Valves
- Solenoid Valve
- Drum/IBC Valves
- Cabinets
- Fill Point Cabinets
- Dispensing Cabinets
- Garage Equipment
5800 Litre Harlequin Garden Harvest Rainwater System
This 1500-litre ‘Garden Harvest’ rainwater harvesting system is ideal for efficient collection, storage and distribution of rainwater to be used during periods of water scarcity. It allows the connection of a hose to the pump within the tank to provide recycled rainwater for irrigating lawns/gardens, car washing and other outdoor water needs.
Moulded in one piece from Medium Density Polyethylene (MDPE), this seamless non-corrosive tank with a strong body, an adjustable turret and a calmed inlet can be installed very easily and reduce water costs by 50%. The system complies with BS8515 Rainwater Harvesting Code of Practice and Part G of Building Regulations in U.K.
Reduce Water Costs – Collecting and reusing rainwater can save up to 50% of metered water costs.
Easy Installation – Our shallow tanks only require a shallow excavation with no concrete backfill, this also reduces your installation costs.
Non-Corrosive – Manufactured from Medium Density Polyethylene (MDPE), Harlequin tanks will not corrode.
Adjustable Turret – Turrets for some of the models have the ability to be extended or reduced to fit each installation.
Strong Tank Body – A seamless one piece moulded tank guarantees strength. There is a flat base for stability, moulded in lifting points and a flat load-bearing lid.
Legislation Compliant – The system complies with BS8515 Rainwater Harvesting Code of Practice and Building Regulations (Part G).
Calmed Inlet – This reduces the turbulence to tank sediment, improving the quality of water supplied.
110mm inlet, outlet and service connections
Fully secured 450mm diameter pedestrian duty manhole cover Integrated filter with stainless steel mesh (size 0.7 x 1.7mm)
Calmed inlet reduces turbulence to tank sediment, improving water quality
Pressure sensitive submersible pump (turns off if no demand), complete with integral run dry protection
Pump can deliver up to 3.5bar pressure, with a flow rate of 2500 litres per hour. Max head of 35m (nominal) and power rating of 800W.
U-bend type overflow also acts as a rodent trap
Supplied with a 25m coil of 25mm HDPE pipe and 1” pump connections
Moulded-in handles for ease of lifting
This 2900-litre ‘Garden Harvest’ rainwater harvesting system is ideal for efficient collection, storage and distribution of rainwater to be used during periods of water scarcity. It allows the connection of a hose to the pump within the tank to provide recycled rainwater for irrigating lawns/gardens, car washing and other outdoor water needs.
Moulded in one piece from Medium Density Polyethylene (MDPE), this seamless non-corrosive tank with a strong body, an adjustable turret and a calmed inlet can be installed very easily and reduce water costs by 50%. The system complies with BS8515 Rainwater Harvesting Code of Practice and Part G of Building Regulations in U.K.
Reduce Water Costs – Collecting and reusing rainwater can save up to 50% of metered water costs.
Easy Installation – Our shallow tanks only require a shallow excavation with no concrete backfill, this also reduces your installation costs.
Non-Corrosive – Manufactured from Medium Density Polyethylene (MDPE), Harlequin tanks will not corrode.
Adjustable Turret – Turrets for some of the models have the ability to be extended or reduced to fit each installation.
Strong Tank Body – A seamless one piece moulded tank guarantees strength. There is a flat base for stability, moulded in lifting points and a flat load-bearing lid.
Legislation Compliant – The system complies with BS8515 Rainwater Harvesting Code of Practice and Building Regulations (Part G).
Calmed Inlet – This reduces the turbulence to tank sediment, improving the quality of water supplied.
Fully secured 450mm diameter pedestrian duty manhole cover Integrated filter with stainless steel mesh (size 0.7 x 1.7mm)
Calmed inlet reduces turbulence to tank sediment, improving water quality
Pressure sensitive submersible pump (turns off if no demand), complete with integral run dry protection
Pump can deliver up to 3.5bar pressure, with a flow rate of 2500 litres per hour.
Max head of 35m (nominal) and power rating of 800W. U-bend type overflow also acts as a rodent trap
Supplied with a 25m coil of 25mm HDPE pipe and 1” pump connections
Moulded-in handles for ease of lifting
This 4400-litre ‘Garden Harvest’ rainwater harvesting system is ideal for efficient collection, storage and distribution of rainwater to be used during periods of water scarcity. It allows the connection of a hose to the pump within the tank to provide recycled rainwater for irrigating lawns/gardens, car washing and other outdoor water needs.
Moulded in one piece from Medium Density Polyethylene (MDPE), this seamless non-corrosive tank with a strong body, an adjustable turret and a calmed inlet can be installed very easily and reduce water costs by 50%. The system complies with BS8515 Rainwater Harvesting Code of Practice and Part G of Building Regulations in U.K.
Reduce Water Costs – Collecting and reusing rainwater can save up to 50% of metered water costs.
Easy Installation – Our shallow tanks only require a shallow excavation with no concrete backfill, this also reduces your installation costs.
Non-Corrosive – Manufactured from Medium Density Polyethylene (MDPE), Harlequin tanks will not corrode.
Adjustable Turret – Turrets for some of the models have the ability to be extended or reduced to fit each installation.
Strong Tank Body – A seamless one piece moulded tank guarantees strength. There is a flat base for stability, moulded in lifting points and a flat load-bearing lid.
Legislation Compliant – The system complies with BS8515 Rainwater Harvesting Code of Practice and Building Regulations (Part G).
Calmed Inlet – This reduces the turbulence to tank sediment, improving the quality of water supplied.
110mm inlet, outlet and service connections
Fully secured 450mm diameter pedestrian duty manhole cover Integrated filter with stainless steel mesh (size 0.7 x 1.7mm)
Calmed inlet reduces turbulence to tank sediment, improving water quality
Pressure sensitive submersible pump (turns off if no demand), complete with integral run dry protection
Pump can deliver up to 3.5bar pressure, with a flow rate of 2500 litres per hour. Max head of 35m (nominal) and power rating of 800W.
U-bend type overflow also acts as a rodent trap
Supplied with a 25m coil of 25mm HDPE pipe and 1” pump connections
Moulded-in handles for ease of lifting
Other specifications-
Inlet Level: 500
Inlet Level: 570
Pipework fitting: Ø110
Turret aperture: Ø600
Filter checking interval: 12 months
This 1500-litre ‘Home Harvest Gravity’ rainwater harvesting system is ideal for efficient collection, storage and distribution of rainwater to be used during periods of water scarcity. It allows the connection of a hose to the pump within the tank to provide recycled rainwater for irrigating lawns/gardens, car washing and other outdoor water needs.
Moulded in one piece from Medium Density Polyethylene (MDPE), this seamless non-corrosive tank with a strong body, an adjustable turret and a calmed inlet can be installed very easily and reduce water costs by 50%. The system complies with BS8515 Rainwater Harvesting Code of Practice and Part G of Building Regulations in U.K.
It comes equipped with a rainwater distribution unit called the ‘Rain Director’ and a smart header tank. The ‘Rain Director’ system pumps rainwater from the storage tank to a header tank where gravity distributes it to the required water appliances such as toilets, washing machines and the garden, minimising on/off pump cycling reducing electrical costs and wear on the pump. Once rainwater has been exhausted, the unit replenishes the storage tank with mains water.
Reduce Water Costs – Collecting and reusing rainwater can save up to 50% of metered water costs.
Easy Installation – Our shallow tanks only require a shallow excavation with no concrete backfill, this also reduces your installation costs.
Non-Corrosive – Manufactured from Medium Density Polyethylene (MDPE), Harlequin tanks will not corrode.
Adjustable Turret – 4500 and 6000 model turrets have the ability to be extended or reduced to fit each installation.
Strong Tank Body – A seamless one piece moulded tank guarantees strength. There is a flat base for stability, moulded in lifting points and a flat load-bearing lid.
Legislation Compliant – The system complies with BS8515 Rainwater Harvesting Code of Practice and Building Regulations (Part G).
Calmed Inlet – This reduces the turbulence to tank sediment, improving the quality of water supplied.
Other Specifications:
Inlet Level: 500mm
Outlet Level: 570mm
Pipework fitting: Ø110
Turret aperture: Ø600
Filter checking interval: 12 months