4000 Litre CEMO Steel Bunded Cylindrical Diesel Storage Tank

Manufactured in the UK from Mild Steel Plate, this Steel Bunded Heating Oil Tank is suitable for the storage of most fuels and light oils.

Included with this Bunded Oil Tank is -

Float Type Bund Gauge

Hydrostatic Tank Contents Gauge

2" BSP Fill Point with Cap

2" BSP Tank Vent with Cap

1" BSP Base feed with Isolation Valve

Top Lift points (Lift empty only)

1" BSP Spare socket into bund

Overfill Prevention Valve

10 Year Guarantee

This self bunding, steel oil storage tank is manufactured to comply with all current regulations.
Suitable for above ground instillations at Domestic, Commercial, Agricultural and industrial locations for storage of Paraffin, Kerosene, diesel oils and light lubricant oils.

Both the inner and outer tanks are constructed from mild steel plate to BS EN 10025.The inner tank providing the required storage area, the outer tank forms the required bund, with capacity of 110% of the total liquid being stored.

The tank vent is piped into the bund then to atmosphere further reducing the risk of spills in the event of overfilling the tank. Tanks are fitted with steel base supports to eliminate ground contact with the tank base. The tanks can also be fitted with steel legs to raise of the floor for gravity feed applications

Compliancy: BS799 part 5, Control of pollution (oil storage) (England) Regulations 2001, PPG2, PPG26.

Suitable for the storage and dispensing of Diesel or Biodiesel including FAME being compliant with the requirements of BS EN 590:2009 and BS EN 14214:2008 including up to a 93% Diesel and 7% biodiesel mix.

Integral 230V pump

Clock gauge

10 Micron Filter

SpillStop overfill prevention

4 meters of hose

Auto-nozzle.

Our Steel Bunded Diesel Dispensing Tanks are perfect for commercial fuel installations. This 2,000 litre capacity Steel Bunded Diesel tank is manufactured by us, in the North of England.

The TEB2000 comes as standard with a secure, sumped lockable cabinet with steel doors & are manufactured from high quality mild steel plate to BS EN 10025.

The outer tank holds a minimum of 110% of the inner tank to comply with all current legislation & comes with a 10 year guarantee, though if properly maintained, the TEB Diesel Tanks are built to last over 30 years.

This 2,000 litre Diesel Tank can be be fully bespoke built, whether it's a different inlet / outlet, higher flow pump, hose reels or even a split compartment to allow storage of other fluids like DEF within the same tank. We can also adjust the Length, Width or Height to suit your requirement. Please contact us to discuss options & get a quote.

Standard Spec -

Bund & Contents Gauge

2" BSP Fill Point with Cap & Non return valve

Tank Vent Cap

Service Hatch

Corner Plinths with optional tank legs

High Security Sumped Cabinet with Lockable Steel Doors

Lifting Points

BS381C 226 - Green (Any colour available on request. Marine grade paints available)

10 Year Guarantee (life expectancy over 30 years if properly maintained)

Contact us if you would like a quote for this tank & let us know if you'd require any changes / additional items

Compliancy -

BS799 part 5

Control of pollution (oil storage) (England) regulations 2001

PPG2

PPG26

Our Steel Bunded Diesel Dispensing Tanks are perfect for use anywhere fuel is required. This 18,000 litre capacity Steel Bunded Diesel tank is manufactured by us, in the North of England.

The TEBT18150 Bunded Diesel Tank comes as standard with a secure, sumped lockable cabinet which is fitted with a steel door. All of our tanks are manufactured from high quality mild steel plate to BS EN 10025. This Diesel Dispensing Tank can be equipped with almost any equipment required, so is suitable for almost all installations.

The outer tank holds a minimum of 110% of the inner tank to comply with all current legislation & comes with a 10 year guarantee, though if properly maintained, all of our Fuel Tanks are built to last over 30 years.

This 18,000 litre Steel Diesel Tank can be be fully bespoke built, whether it's a different inlet / outlet, higher flow pump, hose reels or even a split compartment to allow storage of other fluids like DEF within the same tank. We can also adjust the Length, Width or Height to suit your requirement. Please contact us to discuss options & get a quote.

Standard Spec -

Bund & Contents Gauge

2" BSP Fill Point with Cap & Non return valve

Overfill prevention valve

Tank Vent Cap

Service Hatch

Corner Plinths with optional tank legs

High Security Sumped Cabinet with Lockable Steel Doors

Lifting Points (Lift empty only)

BS381C 226 - Green (Any colour available on request. Marine grade paints available)

10 Year Guarantee (life expectancy over 30 years if properly maintained)

Contact us if you would like a quote for this tank & let us know if you'd require any changes / additional items

Compliancy -

BS799 part 5

Control of pollution (oil storage) (England) regulations 2001

PPG2

PPG26