27,000 Litre NTS Steel Bunded Diesel Dispensing Tank - Inset Cabinet

The Harlequin range of Transfuel Tanks are portable diesel tanks that fully comply with Control of Pollution (Oil Storage) Regulations (2001) (England and Wales) (N. Ireland 2010) (Water Environment (Oil Storage) (Scotland) Regulations 2006).

These are used to dispense fuel from a static location without the need for additional bunding or spill trays! No specialist driver qualifications are required and no vehicle modifications needed in order to use the Transfuel tanks.

These time and money saving portable tanks allow for transport of diesel simply by loading the tank into or onto the vehicle – saving valuable time and money in not having to bring the vehicle to the pumps! Transfuel tanks also enable safe dispensing of fuel with virtually no effort.

This 430-litre Transfuel Bunded tank, is the first plastic-on plastic portable fuel tank on the market which
enables you to safely and legally transport and dispense fuel on-site. Since it can be loaded onto any vehicle it saves valuable time and money in not having to bring the vehicle to the pumps. A factory fitted Piusi By-Pass 3000 Pump, 4m hose and a dispensing nozzle allows the fuel to be dispensed with virtually no effort.

Specialist driver qualifications and vehicle modifications are not required to use a Transfuel Bunded tank. It fully complies with the Control of Pollution (Oil Storage) Regulations (2001) (England and Wales) (N. Ireland 2010) and Water Environment (Oil Storage) (Scotland) Regulations 2006.

Tank Dimensions:

Length: 1010mm

Width: 1260mm

Height: 1090mm

Weight: 110Kg

Capacity: 426 litres

Piusi Pump Specifications:

Cast iron pump body finished with anti-corrosion paint

Flow rate up to 50 lpm

Vane pump with sintered steel rotor and acetal resin vanes

By-pass valve incorporated in the pump body

Available with 12 or 24 volt direct current motor

Motor protection grade IP55

Used in intermittent service with 30 minute work cycle

Pump attachment support bracket

This 1450-litre capacity vertical environment-friendly bunded oil tank is suitable for the storage of heating oil in a domestic or commercial set up. It’s ideal for use when additional tank technology is not a requirement.

Made from Medium Density Polyethylene (MDPE), this tank is lightweight, durable, non-corrosive, simple to install and aesthetically pleasing. Moulded in handles allow for the tank to be transported quite easily.

The Harlequin 1450HQI Comes complete with -

Integrally bunded

Bottom outlet with 1" BSP(F) thread

16" lockable access lid

4" lockable inspection cap

2" fill point

32mm hole with cover for electronic gauge #

Inner tank vent

10 year guarantee

This Horizontal, cylindrical bulk diesel tank with a double skin design is constructed from mild steel plate to BS EN 10025.

The inner tank provides the required storage area, whilst the outer tank forms the required bund with capacity of 110% of the total liquid being stored. The tank vent is piped into the bund and then to the atmosphere further reducing the risk of spills in the event of overfilling the tank.

These tanks are fitted with steel base supports to eliminate ground contact with the tank base.

This Cylindrical fuel tank can be supplied with either a lockable fill point cabinet or full size inset cabinet to house any ancillary equipment fitted with lockable steel or roller shutter door.

Specification:

1 x 2” tank to bund vent.   1 x 2” atmospheric vent with cap.   1 x Bund contents test and drain point with dial gauge. 1 x 2” Base feed with isolation valve.   1 x 2” Top feed with foot valve and strainer.   1 x 2” socket for tank contents. 1 x 2” Socket fill point.   4 x lift points (lift empty only).   1 x 1” socket in bund for optional bund alarm probe.

1 x 2” socket in top of tank for optional high / low alarm probes.     1 x 600mm Service hatch.     Base support: Tank support cradles with ground anchor points.

Paint finish: ISO 12944 C3 Compliant coating. Application design life: 7 years. Typical environments include: Urban and industrial atmospheres, Moderate sulphur dioxide levels, production areas with humidity.

Compliancy:

BS799 Part 5. PPG2, DSEAR 2002

Control of Pollution (Oil Storage) (England) Regulations,

Environment (Oil Storage) (Scotland) Regulations,

Control of Pollution (Oil Storage) Regulations (Northern Ireland),

Control of Pollution (Oil Storage) (Wales) Regulations.

Our Steel Bunded Diesel Dispensing Tanks are perfect for use anywhere fuel is required. This 5,500 litre capacity Steel Bunded Diesel tank is manufactured by us, in the North of England.

The TEBT5500 Bunded Diesel Tank comes as standard with a secure, sumped lockable cabinet which is fitted with a steel door. All of our tanks are manufactured from high quality mild steel plate to BS EN 10025. This Diesel Dispensing Tank can be equipped with almost any equipment required, so is suitable for almost all installations.

The outer tank holds a minimum of 110% of the inner tank to comply with all current legislation & comes with a 10 year guarantee, though if properly maintained, all of our Fuel Tanks are built to last over 30 years.

This 5,500 litre Steel Diesel Tank can be be fully bespoke built, whether it's a different inlet / outlet, higher flow pump, hose reels or even a split compartment to allow storage of other fluids like DEF within the same tank. We can also adjust the Length, Width or Height to suit your requirement. Please contact us to discuss options & get a quote.

Standard Spec -

Bund & Contents Gauge

2" BSP Fill Point with Cap & Non return valve

Tank Vent Cap

Service Hatch

Corner Plinths with optional tank legs

High Security Sumped Cabinet with Lockable Steel Doors

Lifting Points (Lift empty only)

BS381C 226 - Green (Any colour available on request. Marine grade paints available)

10 Year Guarantee (life expectancy over 30 years if properly maintained)

Contact us if you would like a quote for this tank & let us know if you'd require any changes / additional items

Compliancy -

BS799 part 5

Control of pollution (oil storage) (England) regulations 2001

PPG2

PPG26