-
sales@northerntankstore.co.uk
- Call: 01748 835276
- Heating Oil Tanks
- Diesel Tanks
- Petrol Tanks
- AdBlue Tanks
- Water & Chemical
- Waste & Lube Oil
- Septic Tanks & Water Treatment
- Settlement Tanks
- General Storage
- Spill Control
- Tank Accessories
- Heating Oil Tanks
-
Diesel Tanks
- Dispensing Tanks
- Steel Dispensing Tanks
- Plastic Dispensing Tanks
- Dispensing Containers
- Fuel Storage Tanks
- Steel Fuel Storage Tanks
- Plastic Fuel Storage Tanks
- Cylindrical Fuel Storage Tanks
- Petrol Tanks
- AdBlue Tanks
-
Water & Chemical
- Potable Water Tanks
- 1-100 Litre Potable Water Tanks
- 101-650 Litre Potable Water Tanks
- 651+ Litre Potable Water Tanks
- Water Bowser Tanks
- Trailed Water Bowsers
- Fixed Skid Bowsers
- Water Storage Tanks
- 1-100 Litre Water Storage Tanks
- 101-650 Litre Water Storage Tanks
- 651+ Litre Water Storage Tanks
- Water Tank Accessories
- Water Pumps & Hoses
- Water Tank Fittings
- Waste & Lube Oil
- Septic Tanks & Water Treatment
- Settlement Tanks
- General Storage
- Spill Control
-
Tank Accessories
- Flow Meters
- Mechanical Flow Meters
- Digital Flow Meters
- Pulse Meters
- Transfer Pumps
- Diesel Transfer Pumps
- Oil Transfer Pumps
- AdBlue Pumps
- Water Pumps
- Petrol Pumps
- Chemical Pumps
- Hand Pumps
- Electric Pumps
- Fuel Nozzles
- Diesel Nozzles
- Oil Nozzles
- Petrol Nozzles
- AdBlue Nozzles
- Water Nozzles
- Chemical Dispensing Nozzles
- Automatic Nozzles
- Manual Nozzles
- Tank Alarms & Overfill Valves
- Alarms
- Probes
- Overfill
- Fill Point & Vent Fittings
- Fuel Tank Fill Caps
- Fuel Tank Vent Caps
- Hose & Hose Reels
- Delivery Hose
- Suction Hose
- Hose Reels
- Hose Fittings
- Breakaway Couplings
- Camlock Couplings
- Tank Gauges
- Float Type Gauges
- Hydrostatic Gauges
- Electronic Gauges
- Sight Gauges
- Pipe Fittings
- Brass Fittings
- Stainless Steel Fittings
- Malleable Iron Fittings
- Fuel Management Systems
- Management Units & Systems
- Software & Accessories
- Valves
- Gate Valves
- Lever Ball Valves
- Pressure Valves
- Check Valves
- Solenoid Valve
- Drum/IBC Valves
- Cabinets
- Fill Point Cabinets
- Dispensing Cabinets
- Garage Equipment
2500 Litre Vertical Bunded Oil Tank

The Platinum Tanks range of Plastic Bunded Oil Tanks are Manufactured from High Quality UV Stabilised Polyethylene to protect the product from UV Degradation. This 2,000 Litre Plastic Bunded Oil Tank comes fitted with a standard 1" BSP outlet, which is extended from the inner tank through the bund for ease of installation.
The inner tank comes fitted with a gauge bung underneath the hatch, which can be removed in order to fit an ultrasonic sensor at a later date.
To ensure uniform loading of the product, liquid storage tanks must be installed on aa flat non-deformable, non-combustible base which extends 300mm from the product on all sides. When full an oil tank will expand, a gap of 100mm should be left surrounding the product to accommodate this expansion.
To avoid leakage, the 1” outlet must be held while fitting the pipework to the tank. Failure to meet these requirements will void all warranties on the product.
This Plastic Bunded Oil Tank comes complete with -
2" BSP Fill Point
Gauge bung for optional Ultrasonic Gauge
16" Lockable Lid
4" Inspection Hatch
1" BSP Bottom Outlet
10 Year Manufacturers Warranty
For information on the gauges, please click below -
Turners Fabrications range of DLC Steel Bunded Heating Oil Tanks are dual purpose, all steel tanks that has been designed specifically for domestic and light commercial users. The DLC range can easily be upgraded to become a fuel dispensing tank by simply adding a cabinet and pump, you can order this by searching for 'DLCC'.
These Steel Bunded Fuel Tanks are manufactured in 3 parts to enable easy disembly and reassembly on site, allowing these tanks to be installed in even the most hard to reach places.
The DLC range of tanks Bunded Oil Tanks can be supplied with steel base supports, this eliminates direct contact with the ground. Steel section supports are available to run length or width ways to allow them to be positioned to match existing tank bases.
Alternatively, they can be supplied with a variety of Steel Tank Stands which are perfectly suited to gravity feed applications.
These Bunded Steel Oil Tanks have a dual purpose fill/vent which can be used to view the tank’s contents. The tank vent vents directly to the tank bund and then to the atmosphere removing the risk of spills occurring when filling the tank.
Turners Fabrications DLC Range of Bunded Oil Tanks come with a 1” bottom outlet and lockable isolation valve. There is a 1½” BSP and a 2” BSP socket located underneath the lockable tank hatch, this allows additional items such as gauges & alarms to be fitted. The lockable lid keeps the tank contents safe and secure.
Compliance:
Control of pollution (oil storage) (England) regulations 2001, PPG2, PPG26 and BS799 pt5.
This 2500-litre capacity horizontal environment-friendly bunded oil tank is suitable for the storage of heating oil in a domestic or commercial set up. Equipped with a range of fittings, including an ultrasonic contents gauge and bottom outlet fitting kit this bottom outlet tank provides a complete solution for a fully compliant installation.
Made from Medium Density Polyethylene (MDPE), this tank is lightweight, durable, non-corrosive, simple to install and aesthetically pleasing.
Integrally bunded
Bottom outlet with 1" BSP(F) thread
16" lockable access lid
4" lockable inspection cap
2" fill point
32mm hole with cover for electronic gauge
Ultrasonic contents gauge
Bottom outlet fitting kit
LRC overfill prevention probe
Inner tank vent