1" Delivery Hose

The CIM 32DK Check Valve is a spring loaded, brass non return valve that can be used for heating, sanitary, compressed air systems, pumps and fuel distribution networks. These check valves are suitable for installation in vertical, horizontal or oblique pipelines to allow flow in one direction. The CIM 32DK range of non return valves have M x F BSP internal threads on both the inlet and outlet, and have Viton seals.

The Husky Safe-T-Break® couplings are designed to disconnect the hose from the pumping system, in scenarios where a vehicle drives off with a nozzle still connected to the fill point. These Safe-T-Breaks® stop the installation having the whole pump system ripped out, therefore preventing both damage and spillages of fuel.

This Husky breakaway coupling is not re-usable and should therefore be disposed of after the initial break – a cost effective way of ensuring damage to the system is prevented. 

The standard models of these Safe-T-Break® couplings are designed for use with diesel, with a 3/4" ATEX approved version available for petrol. 

High Quality Equal BSPP Male x BSPP Male 60° Cone Hydraulic Adaptors manufactured from steel & zinc plated.

Available in sizes from 1/8" up to 4" BSP

The O.L.E T5020 is a high accuracy electronic gauge for use with fuel tanks that are up to 10 metres high. Designed for use outdoors, the T5020 tank gauge features an IP65 rated enclosed, and an easy to read backlit display which indicates the contents of the fuel tank as a percentage, and in litres.

The T5020 provides a continuous reading of the contents inside the tank, and comes equipped with an alarm to also act as a leak/overfill alarm.

Thanks to the design, this electronic tank gauge can be used to give accurate readings of any shaped tank.

CT5020 tank gauges come as standard with 4-20mA outputs and Modbus RTU/RS485, so can be connected to BMS (Building Management Systems).

O.L.E T5020 Gauge Specifications -

Suitable for any shape tank

+/- 0.25% Accuracy

Suitable for use with Diesel, B100 Biodiesel, AdBlue & Antifreeze

Backlit electronic display

Gives continuous readout in litres (screen also shows a % bar)

Includes 4-20mA outputs

Modbus RTU/RS4485 Communications

Can connect to BMS System

Weatherproof to IP65

Power supply can be 230v, 110v or 24v DC