20,000 Litre NTS Steel Bunded Diesel Dispensing Tank - Inset Cabinet

Manufactured in the UK from Mild Steel Plate, this Steel Bunded Heating Oil Tank is suitable for the storage of most fuels and light oils.

Included with this Bunded Oil Tank is -

Bund Gauge

Tank Contents Gauge

2" BSP Fill Point with Cap

2" BSP Tank Vent with Cap

1" BSP Base feed with Isolation Valve

Top Lift points (Lift empty only)

1" BSP Spare socket into bund

10 Year Guarantee

This self bunding, steel oil storage tank is manufactured to comply with all current regulations.
Suitable for above ground instillations at Domestic, Commercial, Agricultural and industrial locations for storage of Paraffin, Kerosene, diesel oils and light lubricant oils.

Both the inner and outer tanks are constructed from mild steel plate to BS EN 10025.The inner tank providing the required storage area, the outer tank forms the required bund, with capacity of 110% of the total liquid being stored.

The tank vent is piped into the bund then to atmosphere further reducing the risk of spills in the event of overfilling the tank. Tanks are fitted with steel base supports to eliminate ground contact with the tank base. The tanks can also be fitted with steel legs to raise of the floor for gravity feed applications

Compliancy: BS799 part 5, Control of pollution (oil storage) (England) Regulations 2001, PPG2, PPG26.

The Harlequin range of Transfuel Tanks are portable diesel tanks that fully comply with Control of Pollution (Oil Storage) Regulations (2001) (England and Wales) (N. Ireland 2010) (Water Environment (Oil Storage) (Scotland) Regulations 2006).

These are used to dispense fuel from a static location without the need for additional bunding or spill trays! No specialist driver qualifications are required and no vehicle modifications needed in order to use the Transfuel tanks.

These time and money saving portable tanks allow for transport of diesel simply by loading the tank into or onto the vehicle – saving valuable time and money in not having to bring the vehicle to the pumps! Transfuel tanks also enable safe dispensing of fuel with virtually no effort.

This 430-litre Transfuel Bunded tank, is the first plastic-on plastic portable fuel tank on the market which
enables you to safely and legally transport and dispense fuel on-site. Since it can be loaded onto any vehicle it saves valuable time and money in not having to bring the vehicle to the pumps. A factory fitted Piusi By-Pass 3000 Pump, 4m hose and a dispensing nozzle allows the fuel to be dispensed with virtually no effort.

Specialist driver qualifications and vehicle modifications are not required to use a Transfuel Bunded tank. It fully complies with the Control of Pollution (Oil Storage) Regulations (2001) (England and Wales) (N. Ireland 2010) and Water Environment (Oil Storage) (Scotland) Regulations 2006.

Tank Dimensions:

Length: 1010mm

Width: 1260mm

Height: 1090mm

Weight: 110Kg

Capacity: 426 litres

Piusi Pump Specifications:

Cast iron pump body finished with anti-corrosion paint

Flow rate up to 50 lpm

Vane pump with sintered steel rotor and acetal resin vanes

By-pass valve incorporated in the pump body

Available with 12 or 24 volt direct current motor

Motor protection grade IP55

Used in intermittent service with 30 minute work cycle

Pump attachment support bracket

This Diesel Trolley from CEMO is an economical solution to on-site refuelling of diesel powered machinery. Suitable for use under ADR 1.1.3.1 c and fitted with 2 wheels & a handle, this portable Diesel tank is ideal for getting fuel to places which would be hard to reach with more traditional methods.

The CEMO 11133 / 11134 - 60 Litre Diesel trolley comes complete with the follwing - 

12v Battery Pump 30 Litres per minute - comes with 4m Cables OR Battery & Charger

Automatic Nozzle & Nozzle Holster

3 metre dispensing hose with Hose Holder

Internal Baffle

Integral Grip & Carry handles

Filling Cap with integral breather valve

240mm Diameter Plastic tyres

Outlet Connection with Isolation Valve

Our Steel Bunded Diesel Dispensing Tanks are perfect for use anywhere fuel is required. This 2,500 litre capacity Steel Bunded Diesel tank is manufactured by us, in the North of England.

The TEBT2500 Bunded Diesel Tank comes as standard with a secure, sumped lockable cabinet which is fitted with a steel door. All of our tanks are manufactured from high quality mild steel plate to BS EN 10025. This Diesel Dispensing Tank can be equipped with almost any equipment required, so is suitable for almost all installations.

The outer tank holds a minimum of 110% of the inner tank to comply with all current legislation & comes with a 10 year guarantee, though if properly maintained, all of our Fuel Tanks are built to last over 30 years.

This 2,500 litre Steel Diesel Tank can be be fully bespoke built, whether it's a different inlet / outlet, higher flow pump, hose reels or even a split compartment to allow storage of other fluids like DEF within the same tank. We can also adjust the Length, Width or Height to suit your requirement. Please contact us to discuss options & get a quote.

Standard Spec -

Bund & Contents Gauge

2" BSP Fill Point with Cap & Non return valve

Tank Vent Cap

Corner Plinths with optional tank legs

High Security Sumped Cabinet with Lockable Steel Doors

Lifting Points (Lift empty only)

BS381C 226 - Green (Any colour available on request. Marine grade paints available)

10 Year Guarantee (life expectancy over 30 years if properly maintained)

Contact us if you would like a quote for this tank & let us know if you'd require any changes / additional items

Compliancy -

BS799 part 5

Control of pollution (oil storage) (England) regulations 2001

PPG2

PPG26