2000 Litre NTS Steel Bunded Diesel Dispensing Tank - Inset Cabinet

This Generator Store has been specifically designed to house most makes of generators and associated equipment. The units have large doors providing excellent access for installation and maintenance. There is also a personnel door fitted for daily access.

The Gen-Store line are of all steel construction and benefit from a built in spillage retention sump (which eliminates the need for additional interceptor trays). It also has an integrally fitted bulk storage tank which can be permanently piped to the generator. The Gen-Store line have the option to be accoustically lined, this allows none canopied sets to be fitted.

Features - 

Full width access doors for easy access, fitted with anti jam door pins, five lever dead locks and a removable anti ram bar.

High level exhaust outlet.

Filtered air intake / outlet.

Nose deflector plates on air intakes.

Light and thermostatically controlled heat extractor fan.

Removable step (for transportation)

Built in Fork lift points

Certified Lifting eyes.

Acoustically insulated to between 70 / 90  dbA @ 1mtr subject to equipment fitted.

This 1400-litre Fuel Station is an ideal choice for any on-site refuelling requirement. It’s environment-friendly bunded design allows it to safely store and dispense fuel in any small commercial, industrial or agricultural environment. This simple and easy to use diesel storage and dispensing solution is manufactured from high-quality mouldings and materials. It can be customised further by adding fuel dispensing accessories such as a mechanical flow meter, particulate filter and an electronic gauge.

Features:

Fully Bunded

56L/min 240Volt fuel pump

Mechanical flow meter

10Micron particulate & water filter

6m length; 1” delivery hose

Auto shut-off nozzle

Bulkhead light

2” BSP fill point

4” lockable inspection port

LRC overfill prevention probe

Electronic Level Gauge

Optional Extras (Additional Cost):

72L/min fuel pump

Fuel Management System

Installation:

Base Length: 1,450mm

Base Width: 1,450mm

Our 450 litre bunded heating oil tank is manufactured in our factory in the North East of England from mild steel plate, this Steel Bunded Heating Oil Tank is suitable for the storage of most fuels and oils.

This self bunding steel oil tank is manufactured to comply with all current regulations. The inner and outer tanks are constructed from mild steel plate to BS EN 10025.

The tank vent is piped into the bund then to atmosphere further reducing the risk of spills in the event of overfilling the tank. Tanks are fitted with steel base supports to eliminate ground contact with the tank base. The tanks can also be fitted with steel legs to raise of the floor for gravity feed applications

Compliancy: BS799 part 5, Control of pollution (oil storage) (England) Regulations 2001, PPG2, PPG26.

Included with this Bunded Heating Oil Tank is -

Tank Contents Gauge

2" BSP Fill Point with Cap

2" BSP Tank Vent with Cap

1" BSP Bottom Outlet (Top outlet on request)

1 1/2" Spare socket into bund for contents gauge

Top Lift points (Lift empty only)

10 Year Guarantee

This plastic bunded diesel dispensing tank from Carbery is designed for delivering diesel in a similar way to at fuel forecourts.

The Premium Carbery Diesel Fuel Points are supplied with -

• 2" BSP Fill Point
• 5" Lockable inspection point
• 8 Metre delivery hose on an automatic hose reel
• Automatic shut off nozzle
• 230v 56lpm pump
• Lockable access door
• LED Bulkhead light
• 10 Micron water & particle filter
• Apollo ultrasonic tank gauge
• Contents dipstick
• Fuel flow meter

Free delivery on Carbery Tanks includes delivery within mainland UK, but excludes the following postcodes - AB, BT, DD, DG, EH, FK, G, HS, IM, IV, KA, KW, KY, ML, PA, PH, TD, TR and ZE. Please contact us for delivery costs to these postcode areas.