2" Plastic Combi Vent Cap

The Premium AdBlue™ Gravity Hose Kit is a high quality, ready-made solution for the dispensing of AdBlue™ from a bottom outlet, gravity fed installation. Gravity hose kits are a cost effective solution for dispensing AdBlue™ (otherwise known as DEF) from an IBC rather than installing an AdBlue pump system. This is a popular solution for, but not limited to, the agricultural market.

This model of AdBlue™ gravity hose kit is made up of the long life Piusi AdBlue™ delivery hose swaged onto ring clamps for durability, the Suzzara Blue manual nozzle, a 60 x 6 IBC bottom adaptor and cam fitting to enable the quick connection and disconnection of the kit from the IBC. It available in a number of lengths from 3m to 7m, to cater for how high off the ground the IBC in question is. You should not order a kit much longer than what is necessary for the height of the system, as any additional hose beyond this point may reduce the flow rate you could be achieving.

The CTS AdBlue™ Tank und Alarm is an economy, entry level, battery powered AdBlue™ tank alarm system for alerting the user to fluid being detected between the inner tank and the outer bund. If only a bund alert is needed for your tank, this bund alarm is a simple, cost-effective solution and doesn't involve the other warnings associated with a fuel tank level alarm. A red LED will flash and a 90db alarm will sound to alert the user to fluid being detected in the bund - which can be caused by a tank rupture/leak or rainwater collecting in the bund - meaning your bund will need cleaning and/or emptying.

This battery powered AdBlue&trade bund alarm allows 72 hours of full alarm mode, making it ideal for unmanned sites and those with site closure on weekends. Further features include a weatherproof enclosure and test and alarm mute buttons to silence the sounder.

This high quality diesel transfer pump from FMT Swiss AG is manufactured from shock resistant Die-cast aluminium with extremely small tolerances. The small tolerances of this pump allow for great suction & pressure performance.

Fitted with an on/off switch, integral bypass & siphon protection, this 24v transfer pump is designed for a long service life and is capable of a 3 metre suction.

Specification - 

Pump & Switch case freely positionable in all 90° positions

180 Minute duty cycle (Under free discharge)

3 metre cable & clips

1" BSP Inlet / Outlet

Self Priming Vane Pump

35 Litres per minute maximum flow rate

Up to 1.6 bar discharge pressure

3 Metre maximum suction height

Suitable for Fuel oils & Diesel

24v DC

IP66 Safety rating

FKM / NBR Seals

3 year warranty

The SAMOA Polaris Series Wall Mounted transfer Pump Kit is a wall or tank mountable metered diesel pump kit housed within a lockable cabinet. The unit includes a 230v - 50Hz diesel pump with 1.8 m cable and plug, cabinet with nozzle holder with automatic on/off switch, 4m delivery hose, automatic nozzle and a three digit meter flange mounted to the pump and with a 90° swivelling elbow outlet.

Inlet connection: 1" BSP (F) or flange coupling

Maximum suction lift: 2.5m

Pressure: 1.7 bar

230v - 50hz - 2.2 amp - 370 watt

Electric AC motor with IP55 protection, allow continuous operation duty.

On/off switch and fuse.