1400 Litre Harlequin Bunded Fuel Point

Our Steel Bunded Diesel Dispensing Tanks are perfect for commercial fuel installations. This 1,250 litre capacity Steel Bunded Diesel tank is manufactured by us, in the North of England.

The TEB1250 comes as standard with a secure, sumped lockable cabinet with steel doors & are manufactured from high quality mild steel plate to BS EN 10025.

The outer tank holds a minimum of 110% of the inner tank to comply with all current legislation & comes with a 10 year guarantee, though if properly maintained, the TEB Diesel Tanks are built to last over 30 years.

This 1,250 litre Diesel Tank can be be fully bespoke built, whether it's a different inlet / outlet, higher flow pump, hose reels or even a split compartment to allow storage of other fluids like DEF within the same tank. We can also adjust the Length, Width or Height to suit your requirement. Please contact us to discuss options & get a quote.

Standard Spec -

230v - 60 litres per minute pump

4 Metre Delivery Hose

Auto Shut off Nozzle

10 Micron Cannister Water/Particle Filter

Bund & Contents Gauge

2" BSP Fill Point with Cap & Non return valve

Tank Vent Cap

Service Hatch

Corner Plinths with optional tank legs

High Security Sumped Cabinet with Lockable Steel Doors

Lifting Points

BS381C 226 - Green (Any colour available on request. Marine grade paints available)

10 Year Guarantee (life expectancy over 30 years if properly maintained)

Contact us if you would like a quote for this tank & let us know if you'd require any changes / additional items

Compliancy -

BS799 part 5

Control of pollution (oil storage) (England) regulations 2001

PPG2

PPG26

Our range of DLC Steel Bunded Heating Oil Tanks are dual purpose, all steel tanks that has been designed specifically for domestic and light commercial users. The DLC range can easily be upgraded to become a fuel dispensing tank by simply adding a cabinet and pump, you can order this by searching for 'DLCC'.

This 1,400 litre Steel Bunded Oil Tank is manufactured in 3 parts to enable easy disassembly and reassembly on site, allowing these tanks to be installed in even the most hard to reach places.

The DLC range of Bunded Oil Tanks can be supplied with steel base supports, this eliminates direct contact with the ground. Steel section supports are available to run length or width ways to allow them to be positioned to match existing tank bases. Alternatively, they can be supplied with a variety of Steel Tank Stands which are perfectly suited to gravity feed applications.

These Bunded Steel Oil Tanks have a dual purpose fill/vent which can be used to view the tank's contents. The tank vents directly to the tank bund and then to the atmosphere removing the risk of spills occurring when filling the tank.

Northern Tank Stores DLC Range of Bunded Oil Tanks come with a 1” bottom outlet and lockable isolation valve. There is a 1½” BSP and a 2” BSP socket located underneath the lockable tank hatch, this allows additional items such as gauges & alarms to be fitted. The lockable lid keeps the tank contents safe and secure.

Compliance:

Control of pollution (oil storage) (England) regulations 2001, PPG2, PPG26 and BS799 pt5.

This 1400-litre Fuel Station is an ideal choice for any on-site refuelling requirement. It’s environment-friendly bunded design allows it to safely store and dispense fuel in any small commercial, industrial or agricultural environment. This simple and easy to use diesel storage and dispensing solution is manufactured from high-quality mouldings and materials. It can be customised further by adding fuel dispensing accessories such as a mechanical flow meter, particulate filter and an electronic gauge.

Features:

Fully Bunded

56L/min 240Volt fuel pump

Mechanical flow meter

10Micron particulate & water filter

6m length; 1” delivery hose

Auto shut-off nozzle

Bulkhead light

2” BSP fill point

4” lockable inspection port

LRC overfill prevention probe

Electronic Level Gauge

Optional Extras (Additional Cost):

72L/min fuel pump

Fuel Management System

Installation:

Base Length: 1,450mm

Base Width: 1,450mm

Suitable for the storage and dispensing of Diesel or Biodiesel including FAME being compliant with the requirements of BS EN 590:2009 and BS EN 14214:2008 including up to a 93% Diesel and 7% biodiesel mix.

Integral 230V pump

Clock gauge

10 Micron Filter

SpillStop overfill prevention

4 meters of hose

Auto-nozzle.