1350 Litre Plastic Tuffa Bunded Waste Oil Tank

The WOB range offers a simple solution to the problems generally encountered with providing watertight bunds. They are suitable for the storage of most waste oils and lubricants.

Both the inner and outer tanks are constructed from mild steel plate to BS EN 10025. The inner tank providing the required storage area, the outer tank forms the required bund, with capacity of 110% of the total liquid being stored. The tank vent is piped into the bund, then to atmosphere, further reducing the risk of spills in the event of overfilling the tank. The tanks are fitted with steel base supports to eliminate ground contact with the tank base.

WOB's have a large lockable hinged lid with a removable basket preventing any debris entering the tank and providing a place to allow items to drain off. A suction tube is fitted for removal of oil by tanker. The basket can also be removed for emptying and cleaning the tank.

The WOB range offers a simple solution to the problems generally encountered with providing watertight bunds. They are suitable for the storage of most waste oils and lubricants.

Both the inner and outer tanks are constructed from mild steel plate to BS EN 10025. The inner tank providing the required storage area, the outer tank forms the required bund, with capacity of 110% of the total liquid being stored. The tank vent is piped into the bund, then to atmosphere, further reducing the risk of spills in the event of overfilling the tank. The tanks are fitted with steel base supports to eliminate ground contact with the tank base.

WOB's have a large lockable hinged lid with a removable basket preventing any debris entering the tank and providing a place to allow items to drain off. A suction tube is fitted for removal of oil by tanker. The basket can also be removed for emptying and cleaning the tank.

Our Steel Bunded Diesel Dispensing Tanks are perfect for commercial fuel installations. This 13,000 litre capacity Steel Bunded Diesel tank is manufactured by us, in the North of England.

The TEB13850 comes as standard with a secure, sumped lockable cabinet with steel doors & are manufactured from high quality mild steel plate to BS EN 10025. This Diesel Dispenser comes fitted with a 230 volt pump kit, 4 metre delivery hose, automatic shut off nozzle, 10 micron water / particle filter & a mechanical overfill prevention valve, though they can be customised to suit any requirement.

The outer tank holds a minimum of 110% of the inner tank to comply with all current legislation & comes with a 10 year guarantee, though if properly maintained, the TEB Diesel Tanks are built to last over 30 years.

This 13,000 litre Diesel Tank can be be fully bespoke built, whether it's a different inlet / outlet, higher flow pump, hose reels or even a split compartment to allow storage of other fluids like DEF within the same tank. We can also adjust the Length, Width or Height to suit your requirement. Please contact us to discuss options & get a quote.

Standard Spec -

230v - 60 litres per minute pump

4 Metre Delivery Hose

Auto Shut off Nozzle

Overfill Prevention Valve

10 Micron Cannister Water/Particle Filter

Bund Gauge

Hydrostatic Contents Gauge

2" BSP Fill Point with Cap & Non return valve

Tank Vent Cap

Service Hatch

Base Plinths

High Security Sumped Cabinet with Lockable Steel Doors

Lifting Points

BS381C 226 - Green (Any colour available on request. Marine grade paints available)

10 Year Guarantee (life expectancy over 30 years if properly maintained)

Contact us if you would like a quote for this tank & let us know if you'd require any changes / additional items

Compliancy -

BS799 part 5

Control of pollution (oil storage) (England) regulations 2001

PPG2

PPG26

This 1200-litre capacity low profile environment-friendly bunded oil tank is suitable for the storage of heating oil in a domestic or commercial set up. Equipped with a range of fittings, including an ultrasonic contents gauge and bottom outlet fitting kit this bottom outlet tank provides a complete solution for a fully compliant installation.

Made from Medium Density Polyethylene (MDPE), this tank is lightweight, durable, non-corrosive, simple to install and aesthetically pleasing.

Integrally bunded

Bottom outlet with 1" BSP(F) thread

16" lockable access lid

4" lockable inspection cap

2" fill point

32mm hole with cover for electronic gauge

Ultrasonic contents gauge

Bottom outlet fitting kit

LRC overfill prevention probe

Inner tank vent