1225 Litre Atlas Low Profile Single Skin Oil Tank

Also refered to as a 'Tank Pack' or 'Bottom Outlet Kit' This filter assembly kit is a filter designed for heating oil tanks and comes complete with everything that is required to quickly and simply install it.

This kit has an optional Ultra Compact Isolation Valve, which is designed to replace the 1" x ½” conical fitting that is supplied in the standard kit. By doing this, the isolation valve becomes the first compotent to be screwed into the tank. This would allow an engineer to replace the filter without draining the contents of the tank should the filter ever need changing.

The Ultra Compact Oil Tank Filter Kit is designed for bottom outlet domestic heating oil tanks to remove debris with instant isolation and no pollution risk. The kit is comprised of the Ultra Compact isolation valve, 50 micron oil filter, PTFE tape, Heldite and all of the fittings required for installation. 

On other oil tank filter assemblies, an isolation valve is not the first component screwed into the tank which means that if the filter valve needs replacing then the tank needs to be drained. By having the Ultra Compact valve installed first, this filter assembly kit saves the engineer the couple of hours it would previously have taken to pump the tank out, replace the filter valve and then pump the heating oil back in. 

The Ultra Compact oil tank isolator valve is also available alone to replace the 1" BSPT x 1/2" BSPP adaptor if a generic filter kit is already installed. Both the filter kit and the valve alone can be retrofitted during service or at the time of the original tank installation. 

The Watchman Sonic Oil Tank Gauge, although suitable for most fluids, is primarily designed as a heating oil tank gauge. Consisting of a transmitter that fits to the top of the tank and electronic receiver that has a 200 metre range, the Watchman fuel tank gauge measures the fuel contents and transmits it to the receiver plugged in inside the building.

This domestic oil tank level monitor also alerts the receiver when the tank level falls below 10%, giving the user notice of the need to order a fuel delivery without them having to access the tank outside to check. These oil tank level indicators are suitable to be installed on both plastic and steel tanks, providing that it does not exceed their limit of 3 metres in height.