10,000 Litre NTS Steel Bunded Diesel Dispensing Tank - Inset Cabinet

This Generator Store has been specifically designed to house most makes of generators and associated equipment. The units have large doors providing excellent access for installation and maintenance. There is also a personnel door fitted for daily access.

The Gen-Store line are of all steel construction and benefit from a built in spillage retention sump (which eliminates the need for additional interceptor trays). It also has an integrally fitted bulk storage tank which can be permanently piped to the generator. The Gen-Store line have the option to be accoustically lined, this allows none canopied sets to be fitted.

Features - 

Full width access doors for easy access, fitted with anti jam door pins, five lever dead locks and a removable anti ram bar.

High level exhaust outlet.

Filtered air intake / outlet.

Nose deflector plates on air intakes.

Light and thermostatically controlled heat extractor fan.

Removable step (for transportation)

Built in Fork lift points

Certified Lifting eyes.

Acoustically insulated to between 70 / 90  dbA @ 1mtr subject to equipment fitted.

Diamond tanks are manufactured by Harlequin MFG and meet all regulatory requirements as well as being fully bunded.

Excellent Design - specially designed for those awkward installations, the range boasts super slimline options along with handles for easy moving and heavy duty lids on all models.

Integrally Bunded - designed to protect the surrounding environment, all tanks are bunded preventing polution if the internal tank was ever to leak.

Non Corrosive - manufactured from Medium Density Polyethylene (MDPE) your Harlequin tank will not corrode.

10 Year Guarantee (upon registration with Harlequin)

Meets Regulations - as well as being fully bunded, each tank meets all relevant regulatory requirements.

Contents Monitoring - each model has a 32mm hole sutiable for fitting an electronic gauge, also available as an optional extra.

This Horizontal, cylindrical bulk diesel tank with a double skin design is constructed from mild steel plate to BS EN 10025.

The inner tank provides the required storage area, whilst the outer tank forms the required bund with capacity of 110% of the total liquid being stored. The tank vent is piped into the bund and then to the atmosphere further reducing the risk of spills in the event of overfilling the tank.

These tanks are fitted with steel base supports to eliminate ground contact with the tank base.

This Cylindrical fuel tank can be supplied with either a lockable fill point cabinet or full size inset cabinet to house any ancillary equipment fitted with lockable steel or roller shutter door.

Specification:

1 x 2” tank to bund vent.   1 x 2” atmospheric vent with cap.   1 x Bund contents test and drain point with dial gauge. 1 x 2” Base feed with isolation valve.   1 x 2” Top feed with foot valve and strainer.   1 x 2” socket for tank contents. 1 x 2” Socket fill point.   4 x lift points (lift empty only).   1 x 1” socket in bund for optional bund alarm probe.

1 x 2” socket in top of tank for optional high / low alarm probes.     1 x 600mm Service hatch.     Base support: Tank support cradles with ground anchor points.

Paint finish: ISO 12944 C3 Compliant coating. Application design life: 7 years. Typical environments include: Urban and industrial atmospheres, Moderate sulphur dioxide levels, production areas with humidity.

Compliancy:

BS799 Part 5. PPG2, DSEAR 2002

Control of Pollution (Oil Storage) (England) Regulations,

Environment (Oil Storage) (Scotland) Regulations,

Control of Pollution (Oil Storage) Regulations (Northern Ireland),

Control of Pollution (Oil Storage) (Wales) Regulations.

Our Steel Bunded Diesel Dispensing Tanks are perfect for use anywhere fuel is required. This 1,250 litre capacity Steel Bunded Diesel tank is manufactured by us, in the North of England.

The TEBT1250 Bunded Diesel Tank comes as standard with a secure, sumped lockable cabinet which is fitted with a steel door. All of our tanks are manufactured from high quality mild steel plate to BS EN 10025. This Diesel Dispensing Tank can be equipped with almost any equipment required, so is suitable for almost all installations.

The outer tank holds a minimum of 110% of the inner tank to comply with all current legislation & comes with a 10 year guarantee, though if properly maintained, all of our Fuel Tanks are built to last over 30 years.

This 1,250 litre Steel Diesel Tank can be be fully bespoke built, whether it's a different inlet / outlet, higher flow pump, hose reels or even a split compartment to allow storage of other fluids like DEF within the same tank. We can also adjust the Length, Width or Height to suit your requirement. Please contact us to discuss options & get a quote.

Standard Spec -

Bund & Contents Gauge

2" BSP Fill Point with Cap & Non return valve

Tank Vent Cap

Corner Plinths with optional tank legs

High Security Sumped Cabinet with Lockable Steel Door

Lifting Points (Lift empty only)

BS381C 226 - Green (Any colour available on request. Marine grade paints available)

10 Year Guarantee (life expectancy over 30 years if properly maintained)

Contact us if you would like a quote for this tank & let us know if you'd require any changes / additional items

Compliancy -

BS799 part 5

Control of pollution (oil storage) (England) regulations 2001

PPG2

PPG26