100 Litre CEMO Diesel Dispensing Trolley - Manual

Manufactured in the UK from Mild Steel Plate, this Steel Bunded Heating Oil Tank is suitable for the storage of most fuels and light oils.

Included with this Bunded Oil Tank is -

Float Type Bund Gauge

Float Type Tank Contents Gauge

2" BSP Fill Point with Cap

2" BSP Tank Vent with Cap

1" BSP Base feed with Isolation Valve

1" BSP Return Point

Top Lift points (Lift empty only)

1" BSP Spare socket into bund

10 Year Guarantee

Optional Extras -

Top Feed Outlet

Fill Point Cabinet

Overfill Valve

Electronic Tank Gauges

Selenoid Valves

Day Tank Controllers

Pump Kits

Low Level Fill Points

This self bunding, steel oil storage tank is manufactured to comply with all current regulations.
Suitable for above ground instillations at Domestic, Commercial, Agricultural and industrial locations for storage of Paraffin, Kerosene, diesel oils and light lubricant oils.

Both the inner and outer tanks are constructed from mild steel plate to BS EN 10025.The inner tank providing the required storage area, the outer tank forms the required bund, with capacity of 110% of the total liquid being stored.

The tank vent is piped into the bund then to atmosphere further reducing the risk of spills in the event of overfilling the tank. Tanks are fitted with steel base supports to eliminate ground contact with the tank base. The tanks can also be fitted with steel legs to raise of the floor for gravity feed applications

Compliancy: BS799 part 5, Control of pollution (oil storage) (England) Regulations 2001, PPG2, PPG26.

Tuffa Tanks' 30,000 Litre Diesel Dispensing Tank is suitable for the storage & dispensing of Diesel. This tank is Tuffa's largest plastic storage tank and consists of 2 x 15,000 Litre tanks interlinked to give the capacity of 30,000 Litres. 

Both interlinked tanks contain a plastic primary tank holding the fuel and plastic bund (outer tank) protecting against leaks and spills while complying with UK oil storage regulations. The main tank is fitted with a lockable cabinet housing the ancillary equipment. This includes a dispensing pump, flowmeter, hose with automatic shut off nozzle, and an FMS contents gauge and tank alarm. Optional extras are also available. The second tank is a simple bunded holding tank interlinked with the main tank.

Manufactured in the UK from Lower Linear Density Polyethylene, this 30000VBFS Diesel Dispensing Tank is backed by a 10 year guarantee.

Tuffa's 30,000 Litre Diesel Dispenser comes complete with - 

3" Sockets for interlinking (One per tank)

2 x 2" BSP Fill point with cap (One per tank)

Tank Vents (One per tank)

230v Extrernal Pump

Mechanical Flow Meter

6 Metre delivery hose

Automatic Shut off nozzle

10 Micron water/particle filter

Key switch for pump operation

Nozzle Holster

FMS Contents Gauge & Tank Alarm 230v

Overfill Prevention Valve

Lockable Cabinet

The options for this tank include - 

K44 pulsed output flowmeter – to enable connection to an existing fuel management system. This replaces the standard flowmeter.

High flow output with hose reel – a higher output pump, filter and nozzle complete with an 8m x 1” delivery hose with reel which replaces the standard flow option.

MC Box fuel management – a Piusi fuel management system fitted within the lockable cabinet that allows up to 120 authorised users to dispense the fuel from the tank via pin code or a magnetic key system. In addition, the software provided means the system can also be connected to a PC for viewing the transaction data enabling better tracking and real-time information.

No dispensing equipment – suitable for diesel generators or sites with existing dispensing equipment.

The CEMO DT-Mobile Easy Combi 440/50L with Electric pump comes fitted with a 50 litre AdBlue compartment which makes the ideal solution to your diesel dispensing requirements. Manufactured from High Quality polyethylene, this Transportable Diesel tank is approved for transport under ADR.

The CEMO DT-Mobile Easy Combi 440/50 Comes complete with the following -

Integral Nozzle Holder

Integral Vent and Pressure relief valve

Integral Fork Lift Pockets

Recesses for ratchet straps during transport

Hinged Lid

40 Litre per minute 12v transfer pump with 4 metre cable

30 Litre per minute 12v CENTRI SP30 pump with 4 metre cable for AdBlue Compartment

4 Metre delivery hose for diesel

4 Metre delivery hose for AdBlue

Automatic Shut off Nozzle for Diesel

Automatic Shut off Nozzle for AdBlue

The AceCube compact from DyMac is an innovative ADR diesel tank manufactured from steel. They are designed to be transported and lifted while full of fuel.

The AceCube compact tanks come fitted with bi-directional fork lift pockets, as well as four stacking corners which can also be used at crane lifting points. The outlet/inlet ports are conveniently positioned in a recessed equipment department which also allows the use of pumping equipment.

AceCube Compact Standard Specification -

3" BSP Fill Pipe

1" BSP Return Pipe

2" BSP Vent Pipe

1" BSP Feed Point with 2 x 1" BSP Female Connections

3/8" BSP Feed Pipe

1½" BSP Gauge Point

2" Pressure Vent

¼" BSP Emergency Vent

1" BSP Drain Pipe

6mm Dipstick